User Manual

Smart Band

User Guide

Working condition for mobile

iOS 8.0 & above

Android 4.4 & above

Support Bluetooth 4.0

Quick Start Guide

1. Download DENVER BFH-15 app

The smart band need to pair with the smart phone through app. Before downloading, please refer to working

condition for mobile.

Way to download 1: Searching the QR code, scan and download app.

Please use the QR code Scan tool to scan the following QR code and open the link and download app. In case

there is any problem to open the link, please try to copy the link and open it by browser.

Way to download 2: Search in the phone market and download. Please search and download the “DENVER

BFH-15” from App Store or Google play store.

2. Device Activate & Charge

Make sure power is working normally before initial use. In case device is under low battery, connect the device

to the charger. Device will automatically boot up (please connect the USB in normal DC port (5V-500mA) for

charging as below. The host should be separated from the strap when charging).

3. Pair the device

Open pair device in the app, please make sure the Bluetooth is ON when pair the device. When searching and

pairing device, please long press on the screen of the device and activate the device (light on). App will search

the device automatically, choose the device name and connect the device to the app.