Operation Manual

3. Adjust the VOLUME on the unit or on the external device to increase or decrease the music volume to your desired level.
4. Press and hold the PLAY/PAUSE/PAIR/SCAN button to disconnect Bluetooth.
Note: The Bluetooth works best within 10 meters in open air.
AUX-IN OPERATION
1. Press the FUNCTION/ button on unit to select the “AUX” mode.
2. Connect your audio device to the AUX IN jack on the top panel of the unit with an AUX IN cable.(audio cable is not included)
Eng-4
Adjust the VOLUME on the unit or on the external device to increase or decrease the music volume to your desired level.
3. Control the playback with your audio device.
MIC JACK OPERATION
Microphone input is available in all modes.
1. Connect your microphone to the two 6.3mm MIC JACK on the unit.
2. Rotate the MIC VOL. knob on the unit to increase or decrease the microphone volume.
3. Press and hold the P-MODE/M./ECHO button to turn on or turn off the microphone echo effect.
Technical Specifications
GENERAL
Power Requirements AC100-240V~60/50Hz
Power consumption 33W
Power output MAX 20W X 2
FM frequency FM 87.5-108MHz
AUX in jack 3.5mm
Microphone jack 6.3mm
Work temperature 5°C - + 40°C
Bluetooth
Communication system Bluetooth Standard version 2.1+EDR
Reception Range 10 meter (line-of-sight distance)
Compatible Bluetooth profiles Advanced Audio Distribution Profile (A2DP)
ACCESSORIES
Instruction Manual x 1pc
AC Cord x 1pc
Note: Specifications are subject to change for continuous improvement without prior notice.
Eng-5
4