Instruction Manual

BTE-110 Bluetooth Earbuds Instruction Manual

** Please read all instructions prior to usink the device.

Bluetooth power ON/OFF:

1. Power on: Press and hold the multifunctional button for 3 seconds until the LED flashes blue

3 times.

2. Power off: Press and hold the multifunctional button for 3 seconds to power off.

3. If the LED Indicator turns form BLUE to RED when in standby mode, turn the device off to

conserve power.

4. Bluetooth pairing:

A. Press and hold the multifunctional button for 6 seconds.

The LED Indicator flashes BLUE & RED to indicate pairing mode.

B. Activate the Bluetooth function on your mobile device and select BTE-110 to pair. The

mobile device indicates if pairing has been successful.

Answering calls:

Press the multifunctional button to answer an incoming call.

Ring off the call:

Press the multi-function button to hang up an active call.

Call back:

PAGE 1
BTE-110 Bluetooth Earbuds Instruction Manual ** Please read all instructions prior to usink the device. Bluetooth power ON/OFF: 1. Power on: Press and hold the multifunctional button for 3 seconds until the LED flashes blue 3 times. 2. Power off: Press and hold the multifunctional button for 3 seconds to power off. 3. If the LED Indicator turns form BLUE to RED when in standby mode, turn the device off to conserve power. 4. Bluetooth pairing: A. Press and hold the multifunctional button for 6 seconds.
PAGE 2
Press the multi-function button twice to redial the last caller’s number. Charging: - Insert the micro-USB plug into the charging port and connect the opposite USB end to a computer or compatible AC wall adapter. - The LED Indicator lights up RED while charging. The LED turns BLUE when the battery is full. Volume control: - Press the “+” button to increase the volume. - Press “-“ button to reduce the volume.
PAGE 3
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly. Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below.