Instruction manual BTH-204 1
www.facebook.dk/denver-electronics Overview: Feature: Bluetooth version: V4.1+EDR Supported profiles: HFP, A2DP, AVRCP Support 3.5 mm stereo audio input Operation Range: 10 meters Play time: up to 10 hours Talk time: 10 hours Charging voltage: DC5V/500mA Charging port: Micro USB Charging time: 2.
Operation specification: 1.Charge headphones. Please connect headphones to PC with included USB cable, or to an external USB charger (USB charger not included). Red indicator is on while charging. Fully charge may take up to 2.5 hours. Disconnect when charging is complete. 2.ON/OFF: ON: turn the switch key to ON position, you will hear a Beep sound & blue and red light will flash. If the headphones are already paired with other unit it will try to pair again, otherwise you have to pair it.
Note: you may need to connect certain device separately after pairing. The blue indicator of headphone will flash slowly when it is connected to your device successfully. The headphone will automatically search and connect to previously connected Bluetooth device after restart. Multi-devices pairing is allowed for headphones, but the actual use is only available for one device at a time. 4.
Indicator: Blue light flash slowly Blue and red light flashing Red light flashes with alarm sound Red light and prompt charge Stable blue light No light Bluetooth connected successfully Bluetooth: headphone is on, waiting for connection.
batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city. Hereby, Inter Sales A/S, declares that this product DENVER BTH-204 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of conformity may be obtained at: Inter Sales A/S, Stavneagervej 22, DK-8250 Egaa, Denmark.