User Manual

ManualsBrandsDenver ManualsAudioWireless Bluetooth headset with active noise reduction Built-in rechargeable battery, handsfree function for calls, AUX input with cable

Table Of Contents

ENG

Congratulations on your purchase and thank you for your use of our Bluetooth Active

Noise Cancelling Headset. In order to start quickly, please read the user guide

carefully.

Caution

Please turn off the headset and put it into box to avoid damage, scratches or bracket

deformation when long time no use. In order to prolong the battery service life, please

charge every 6 months.

Please charge at first if the headset is left unused for long time.

The battery of headset is original and please don’t change it by yourself.

Please keep the headset under dry place.

Please don’t put this product into the environment with temperature over than 60

℃

or into fire to avoid battery blast accident.

Please don’t bent or twist the bracket to avoid deformation.

Please don’t tear down ear-cushions by un-professional person.

Don’t adjust the volume to a very high level and continued play. If tinnitus occurs,

please turn the volume down or stop playing, do not turn the volume up suddenly.

Please slowly turn up the volume to avoid hearing damage caused by high volume.

Do not use the headset in dangerous place or place where cannot hear the outside

sound.

Included:

The headset contains the following parts:

Bluetooth Active Noise Cancelling Headset X 1

Manual X 1

3.5mm – 3.5mm audio Cable X 1

Micro USB Charging Cable X 1

VOLUME-/PREVIOUS SONG

VOLUME+/NEXT SONG

Summary of content (7 pages)

PAGE 1
ENG Congratulations on your purchase and thank you for your use of our Bluetooth Active Noise Cancelling Headset. In order to start quickly, please read the user guide carefully. Caution 1. Please turn off the headset and put it into box to avoid damage, scratches or bracket deformation when long time no use. In order to prolong the battery service life, please charge every 6 months. 2. Please charge at first if the headset is left unused for long time. 3.
PAGE 2
ANC ON/OFF MFB (POWER ON/OFF; MAKE/END PHONE CALL; PLAY/PAUSE) 3.
PAGE 3
other device made for USB charging. Plug the Micro USB end of the included USB cable into the USB micro port charger connector under the right ear-cap of the headphone. Plug the other end into a USB port on your computer or other devices made for USB charging. The indicator light will be red while charging. Once fully charged, the indicator light will turn off. Charge time is about 3 hours on an empty battery. Active Noise Cancelling On: Hold the ANC button for 1 second. Green LED light will turn on.
PAGE 4
PAGE 5
The headset is compliant with the Bluetooth Specification 4.1support the following profiles: Headset Profile (HSP) V1.6, Hands-free Profile (HFP) V1.5, Advanced Audio Distribution Profile (A2DP) V1.0, and Audio Video Remote Control Profile (AVRCP) V1.4 input rating 5V DC, 0.5A Calls: To make a call, use your mobile phone in the normal way when the headset is connected to it. Quickly Press the MFB twice to call the last number in the call list.
PAGE 6
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly. Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below.
PAGE 7