CAT-710 SINGLE CAT-720 TWIN MD DUAL 6 7 5 0 INSTRUCTION MANUAL MD DUAL CAR STEREO DVD/SVCD/VCD/CD/MP3/WMA/MP4 PLAYER 8 9 0 4 4 5 6 9 5 WITH PLL FM STEREO RADIO 4 ( -6) RDS AUDIO-VIDEO WIRELESS TRANSMISSION FRONT AUX IN DETACHABLE FRONT PANEL RESET 6 7 8 7 8
BEFORE YOU BEGIN PRECAUTIONS: CAUTION: USE OF CONTROLS OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD. • • • • Keep this manual handy as a reference for operating procedures and precautions. Always keep the volume low enough so you can hear sounds outside of the car. Protect this product from moisture.
INSTALLATION PRECAUTIONS • Choose the mounting location carefully so that the unit will not interfere with the normal driving functions of the driver. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight or hot air from the heater, or where it would be subject to dust, dirt or excessive vibration. • Use only the supplied mounting hardware for a safe and secure installation. • Be sure to remove the front panel before installing the unit.
TO SUPPORT THE UNIT Dashboard 1. UNIT 2. RELEASE CASE 3. DASH BOARD 4. HEX NUT 5. LOCK WASHER 6. PLAIN WASHER 7. CAR BODY 8. REAR SUPPORT STRAP 9. TAPPING SCREW 10. M5 X 15 HEX BOLT 4 4 6 5 8 0 7 5 9 ISO Connector VIDEO OUTPUT (YELLOW): YELLOW (PLUG) AUDIO LINE OUT (GREY): RED (R) WHITE (L) AUDIO LINE IN (BLACK): RED (R) WHITE (L) B 4 6 5 7 4 6 8 5 7 CONNECTOR A 4 8 A 4. MEMORY +12V 5. AUTO ANTENNA OUTPUT 7. +12V (TO IGNITION KEY) 8.
Locations of Parts (Main unit) 6 7 5 0 6 MD DUAL 8 9 0 4 4 5 6 9 5 4 ( -6) 1. POWER ON/OFF ( ) 8 9 0 4 4 2,3.SELECT BUTTON: VOL/TA VOL/BASS/TREBLE/BALANCE/FADER 4. PRESET STATIONS (1,2,3,4,5,6) 4 ( -6) (AF/ST) 5. ‘AF’ function (ALTERNATIVE FREQUENCIES) / STEREO/MONO SELECTOR 6. ‘TA’ function (TRAFFIC ANNOUNCEMENT) / LOUDNESS (TA/LD) 7. ‘PTY’ function (PROGRAM TYPE) 8. DISPLAY (DISP) 9.
Locations of Parts (Remote Control) 15 1. POWER ON/OFF 2. MODE/DUAL PLAYING 3. PLAY/PAUSE ( ) 4. STOP/RETURN ( ) 5. SELECT 6. SEEK+/SEEK7. VOL +/VOL8. KEYPAD 9. GOTO 10. AUDIO 11. ENTER 12. NAVIGATION 13. AUTO SEARCH / REPEAT 14. RANDOM 15. BAND/SYSTEM 16. STEREO/MONO / PROGRAM 17. TITLE (MAIN MENU) 18. SUBTITLE 19. SETUP 20. ANGLE 21. SLOW MOTION 22. ZOOM 23. PLAYBACK CONTROL 24. ON SCREEN DISPLAY 25.
GENERAL OPERATIONS Turning the unit ON/OFF (PWR) • Head Unit: Press PWR to turn on the unit. To turn off, press this button again. • Remote Control: Press button to turn on the unit. To turn off, press this button again. Setting Time 1 Press DISP button repeatedly until time shows. 2. Press and hold DISP button. Hour digit starts blinking. 3. Rotate Volume knob to adjust hour. Press SEL 4. Rotate Volume knob to adjust minute. 5. Press DISP to save and exit.
Auto seek/Preset scan (A/PS) Preset Scan (PS) - By pressing shortly, the radio plays each preset station for 5 seconds. Auto Seek (AS) - By pressing longer than 1 sec, auto seek is activated. The 6 strongest stations are preset and stored in the corresponding preset number. When Auto Seek operation is finished, the radio executes the preset scan. Note: This feature is called AMS on the remote control. Scan automatic tuning control (SCN) This key is operated as RADIO SCAN.
SEL 2 sec. SEL TA SEEK SEL PI SOUND SEL RETUNE TA SEEK SEL PI SOUND SEL RETUNE RETUNE L / RETUNE S SEL MASK DPI MASK DPI: masked only the AF which has different PI. MASK ALL: masked the AF which has different PI and NO RDS signal with field strength. VOL MASK DPI / MASK ALL BEEP MODE (2) When press the SEL button for more than 2 seconds, it is activated as selecting mode of these function. 2 sec.
Repeat tracks You can choose between repeat playback of a single track or all tracks. 1. Press RPT on the head unit or remote control during playback. 2. Every time you press this button, the unit switches to the following settings: • Repeat Single – Repeat the current playback track. • Repeat All – Repeat all tracks. • Off – Turn repeat off. Random Playback You can play the tracks in random/shuffle order instead of normal progression. 1. Press RDM on the head unit or remote control during playback.
Slow motion playback This feature lets you slow down playback. 1. Press Slow on the remote control during playback. 2. Pressing it repeatedly will switch you to the following steps: 1/2 – 1/3 – 1/4 – 1/5 – 1/6 – 1/7. Note: • To resume normal playback, press . • There is no sound during slow motion playback. • With some disc, slow motion may be unclear during slow motion playback. Fast forward/Reverse 1. Press and hold (forward) or (reverse) button 2.
1. Make sure to turn off PBC feature first. 2. Using the number pad on the remote control, enter the desired track number. Note: • To select 3, press 3. • To select 13, press 10+, 3. • To select 23, press 10+, 10+, 3 in order. Changing audio language during playback VCDs can provide audio playback with different languages. It is usually separated into 2 channels (left and right). With VCDs featuring multi-audio recordings, you can switch between languages/audio systems during playback. 1.
SETTING UP THE DVD PLAYER Important 1. Load any disc into the unit before you can access the settings. 2. Press SETUP on the remote control. 3. Use the navigation key and press ENTER to setup the DVD player. Note: Depending on the type of disc inserted, some features may not be available. SETUP CATEGORY TV SYSTEM AUTO PLAY VIDEO TV TYPE PASSWORD OPTIONS NTSC, PAL60, PAL, AUTO ON/OFF Interlace-YUV , TV-RGB P-SCAN YPBPR, S-VIDEO 4:3 PS, 4:3 LB, 16:9 1. Kid Safe 2. G 3. PG 4. PG-13 5. PG-R 6. R 7.
TECHNICAL SPECIFICATIONS CD/MP3/WMA PLAYER SECTION Signal to Noise Ratio Channel Separation Frequency Response > 60 dB > 50 dB (1 kHz) 20 Hz - 20 kHz TUNER (FM) Frequency Range Intermediate Frequency Sensitivity Stereo Separation Signal to Noise Ratio Channel Step 87.5-108 MHz 10.7 MHz 2.8 µV 30 dB 50 dB 50 kHz AV RF Frequency Range Channel 1 Channel 2 Channel 3 Channel 4 2.450GHz 2.432GHz 2.414GHz 2.468GHz LINE-OUT Output Impedance 5V max.