Operation Manual

Press the lock button on the camera (the No.12 button described in the overview illustration) to
lock the current video. The locked video cannot be deleted during loop recording or when the SD
card is full.
Note: Turn on the locking function only when emergency occurs. Otherwise, the locked video
may make the SD card full, and make the video recording impossible.
9. Delayed shutdown
Turn on this function through the menu option. When the time option is selected and your car is
turned off, the camera shuts down after the set time elapsed.
10. Parking monitor
To better monitor your parked car, make the following settings. Set the G-Sensor menu option to
the high level, and set the Parking Control menu option to the high level. After such settings, when
your parked car is hit by some external force, the camera automatically turns on and start 30
seconds video recording.
11. Car plate number
You can setup your car plate number through the menu option shown below. When your car plate
number is set, the car plate number can be shown in the recorded videos.
12. GPS function
Connect the GPS antenna to the HDMI port on the camera. Using the GPS antenna, the camera
records your travelled distance, route, maximum speed, minimum speed, and altitude, etc. To read
those driving information, you must playback the video on the computer-based player named
3 ENG