Instruction Manual Dash Cam for Cars CCT-1210 MK3 www.denver-electronics.com Before operating this product, please read this instruction manual carefully and completely.
Product structure 1.LCD screen 5.Mode 2.UP/Mute 6.Down 10.Night lights 7.Reset 11.SD card Slot 3.Menu 4.OK/Power 8.Lens 9.Mic 12.
1. Charging Connect the camera to car charger via the USB port. 2.Turn on/off camera If the camera is connected to car charger, it will automatically turn on with the car. If not connected in car, please do as follows: Long press OK/Power button ,camera will turn on. Long press OK/Power button again, camera will turn off. 3.Video Recording If the camera is connected to car charger, it will start video recording automatically. And stop when you turn off the car.
.Photo taking After turn on camera, short press Mode button switch to photo mode. Then short press OK/Power button to take a photo. 5.Playback After turn on camera, short press Mode button switch to playback mode, then short press OK/Power button to playback recorded video. 6. Video setup In video mode, short press Menu button to setup video specifications, then short press Menu button again into the second menu page. 7.
8. Specifications LCD Screen Size 2.
9.Trouble shooting: For problems in normal operating situation ,please try these methods below: ● Can’t take photo and recording Check the if the TF card has enough free space or is locked ● “files error” when replay photo or video Uncompleted files, because of SD card storage error, please format your SD card ● Black image when recording sky or water scene Scenes with big contrast will influence the automatic exposure function of camera; you can adjust “EV in setting mode to correct.
● Crash Restart by ” RESET” camera.
Please notice - All products are subject to change without any notice. We take reservations for errors and omissions in the manual. ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately. As the end user it is important that you submit your used batteries to the approriate and designated facility.
DENVER ELECTRONICS A/S Omega 5A, Soeften DK-8382 Hinnerup Denmark www.facebook.
