OWNER’S MANUAL Mobile Audio System PLL Synthesizer Stereo Radio Automatic Memory Storing USB&SD Card Interface Detachable Front Panel Auxiliary Input Function Bluetooth Hands-free function & A2DP (Advanced Audio Distribution Profile) Stereo Audio Transmission DAB function 1
CONTENTS Installation ........................................... 3 MASK DIP/ALL.................................... 12 DIN Front-Mount (Method A)................. 3 EONTA DX/LO ................................... 12 Installing the unit ............................... 3 TA-VOLUME...................................... 13 Removing the unit ............................. 4 REG OFF/ON .................................... 13 DIN Rear-Mount (Method B) ................. 5 Using the detachable front panel ..
INSTALLATION Notes: 1. Choose the mounting location where the unit will not interfere with the normal driving function of the driver. 2) Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. 3) Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
INSTALLATION 6. Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver. Not all tabs will be able to make contact, so examine which ones will be most effective. Bending open the appropriate tabs behind the dashboard to secure the sleeve in place. of the unit and the other long threading terminal to the dashboard. Spring Washer Hex Nut Metal Strap Mounting Bolt Plain Washer Tapping Screw Dashboard Tabs 10.
INSTALLATION DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota, follow these mounting instructions. Use the screw holes marked T (Toyota), N (Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle. Side View showing Screw Holes marked T, N Screw Factory Radio Mounting Bracket Screw Dashboard or Console To fasten the unit to the factory radio mounting brackets.
USING THE DETACHABLE FRONT PANEL REMOVING THE FRONT PANEL A. Press the release button ( ) on the Precautions when handling 1. Do not drop the front panel. 2. Do not put pressure on the display or front panel and pull off the front panel. control buttons when removing or installing the front panel. 3. Do not touch the contacts on the front panel or on the main unit body. It may result in poor electrical contact. 4.
WIRING CONNECTION ISO CONNECTION 7
OPERATION LOCATION OF KEYS 1.MODE/PAIR 2. (release button) 3. (hang up)/LOU/BND 4. SEL/MENU 5. 6. MUTE 7.LCD 8. 4/SHF 9. 5 DIR10. 1/PAU 11. 2 SCN 12. 3 RPT 13. AUX IN 14. 6 DIR+ 15.USB interface 16.9/PTY 17. #/SCAN 18. 0 DSP 19. */+/ AS/PS 20. 8 TA/EQ 21. 7 AF 22. T-MENU/TRANS 23. 24. (pick up) 25. SD 26. Reset button 27.
OPERATION BASIC OPERATION - All the function buttons do not operate. - Error symbol on the display. Note: if press RESET button (25), the unit can’t work yet, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the front panel. SWITCHING ON/OFF THE UNIT Press any button to turn on the unit. When the unit is on, press and hold button (6) to turn the unit off. FACEPLATE RELEASE Press button (2) removable faceplate.
OPERATION DAB ANTENNA INSTALLATION 4) HOUR 24/12 You can select time format to 12 hour or 24 hour format. (In AREA item. When you change the area to the EUR. The time format will be changed to 24 HOUR format automatically. When you change the area to the USA. The time format will be change to 12 HOUR format automatically.) Put the antenna on the left or right of windows. The minimum installation height is 60mm from the windows top.
OPERATION Using PTY to Select Program 1) Press PTY button (16). Then press preset button (1-6) repeatedly. You can select below programs: button 1: AFFAIRS / INFO / SPORT / EDUCATE / NEWS button 2: ROCK M / EASY M / LIGHT M / CLASSICS / OTHER M button 3: ROCK M / EASY M / LIGHT M / CLASSICS / OTHER M button 4: WEATHER / FINANCE / CHILDREN / SOCIAL / RELIGION button 5: PHONE IN / TRAVEL / LEISURE / JAZZ / COUNTRY button 6: NATION M / OLDIES / FOLK M / DOCUMENT / TEST / ALARM. (Press PTY button (16).
OPERATION one cyclic search, the radio retunes to next station with TP information. Note: In TA SEEK mode, the current station can be changed to the completely different station because the unit searches TP station when the field (signal) strength of the current station is very weak, or the current station has no “TP” signal. (The higher priority is TP rather than PI.) b) TA ALARM mode When this mode is selected, any automatic retune mode is not activated. Only double beep sound (ALARM) is output.
OPERATION When the filed strength level of EON linked is less than threshold level, the radio does not switch that station, and a customer can hardly listen to any disturbances. When EON TA LOCAL mode is selected, “EON TA LO” on numeric display is indicated for a few seconds. EON TA DISTANCE mode EON TA switch is tried to implemented by the information of current station. When EON TA DISTANCE mode is selected, “EON TA DX” on numeric display is indicated for a few seconds.
OPERATION USB interface (15). You can connect an USB driver through this interface (15). When you connect an USB driver through the interface, the unit will search the MP3 files or WMA files and start to play automatically. If in other mode, you can also press MODE button (1) to select USB mode. and “S-RDM” will disappear. Press and hold SHF button (8) for 2 seconds will play all files (in the current folder) in random order. And “D-RDM” will appear on LCD. Press it again will exit this mode.
OPERATION AS/PS Mode Select BND/LOU ENTER M1 A, B, C, 1 M2 D, E, F, 2 M3 G, H, I, 3 M4 J, K, L, 4 M, N, O, 5/Directory DOWN P, Q, R, 6/Directory UP M5 M6 songs. Select the desired directory/songs by using buttons (4) and BND/LOU or SEL button to confirm. If the selected title is a song, it starts to play. If the selected title is a directory name, display will show (‘ ‘), then 7)Use the buttons (4) to list all songs under this directory and select the title.
OPERATION BLUETOOTH OPERATION The USB solution can support: 1. Folder: 500 max. 2. File: 999 max. 3. Depth of folder: 8 layers 4. Size: 2 GB PREPAIR FOR OPERATION BLUETOOTH (i) When use Bluetooth, please make sure the mobile phone supports Bluetooth function. Note： The main unit can only support the standard USB-memory disc which is approved by Microsoft. USB MP3 player is not a standard which means different brand name or different models have their own standard.
OPERATION During Pairing, MODE key will no functional during pairing mode. When pairing, you can press PAIR button (1) to terminate the pairing. The details please see the following instruction. 10) RRE NUM: You can save 10 phone-call to the phonebook 1. In PRE NUM mode, rotating button (4) to select the NUMBER. Then press SEL button, and enter the phone number. Then press SEL button again to save it to phonebook 1. CONNECT This unit is built-in auto-reconnection function.
OPERATION the call automatically. In MANU ANS mode, when a call coming, the Phone Number will appear on LCD. you can press button (24) to answer the call, or press button (3) to reject the incoming call. Note: if you input the wrong number, shortly press CLR button will clear it. Press and hold CLR button will clear all numeric. TRANSFER THE CALL BETWEEN MOBILE PHONE AND THE UNIT 7) TALK (00~20): You can setting the bluetooth volume in TALK 00 item. If it is 00, When there is a call coming.
SPECIFICATION GENERAL Power Supply Requirements : DC 12 Volts, Negative Ground Chassis Dimensions Tone Controls : 178 (W) x 160 (D) x 50 (H) - : ±10 dB : ±10 dB Bass (at 100 Hz) Treble (at 10 kHz) Maximum Output Power : 4x40watts Current Drain : 15 Ampere (max.) RADIO Frequency Coverage IF Sensitivity (S/N=30dB) Stereo Separation FM 87.5~108 MHz 10.
TROUBLE SHOOTING Before going through the checklist, check wiring connection. If any of the problems persist after checklist has been made, consult your nearest service dealer. Symptom No power. No sound. Cause Solution The car ignition switch is not on. If the power supply is connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. Temperature inside the car is too high.
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly. Electric and electronic equipment is marked with the crossed out trash can symbol, seen below.
