CRB-619BLACK MK2 ENGLISH FUNCTION AND CONTROLS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. POWER ON – OFF / ALARM OFF BUTTON SOURCE BUTTON MEMORY/ CLK.ADJ.
LED DISPLAY TIME Indicator PM Indicator BLUETOOTH Indicator AUX Indicator FM Indicator ALARM 1 Indicator ALARM 2 Indicator PREPARATION FOR USE AC-DC adaptor connection: The retro radio unit can be powered by an external AC-DC adaptor, required the output DC 5V 1.5A (included). POWER CONNECTION Plug the AC-DC adaptor to a household outlet AC source, connect the adaptor’s DC output plug to the DC POWER INPUT Jack of the main unit.
SETTING THE ALARMS: 1. Press and hold the (4) alarm 1 or (6) alarm 2 button until the alarm time flashes. 2. Turn the SET KNOB (12) to set the desired alarm time, Press the alarm button the setting is complete. Note: - Press SKIP BACK button (7) to adjust data backward. - Press SKIP FORWARD button (9) to adjust data forward. - Keep depress SKIP BACK (7) or SKIP FORWARD (9) button for 2 seconds to enable auto forward.
LISTENING TO RADIO 1. Press the POWER ON-OFF button (1) to turn the unit on. Press SOURCE button (2) to select radio play mode, Turn the Set Knob to tune radio to a desired station. 2. If you press and hold the SKIP FORWARD button (9) or SKIP BACK BUTTON (7) button for one second, then release, the unit will automatically scan to the next broadcasting station. 3. Press the POWER ON-OFF button (1) to turn the radio OFF. TO SET / RECALL THE RADIO PRESETS 1.
communication standard. The Bluetooth transmitter and receiver hardware in this unit has an approximate operational range of 30 feet in open space. Generally Bluetooth devices can communicate with each other clearly within a regular sized room or office. Operation between different rooms will depend on the construction of the room. It is important to recognize the fact that Bluetooth communication range may be substantially reduced if the signal passes through a solid object.
PLAYING AUDIO WIRELESSLY 1. Follow the instructions for Pairing a Bluetooth Device. 2. Use the native controls on the connected Bluetooth Device to select a track. 3. To play or pause the selected track, use the native controls on the connected Bluetooth Device or press the Play/Pause button. 4. Audio played through the connected Bluetooth device will now be heard through the speakers. CHANGING THE BLUETOOTH CONNECTION THE NEW MOBILE PHONE Press and hold the Pair button (8) for 3 seconds.
SPECIFICATIONS Frequency range : 87.5 – 108 MHz Battery backup : 3V (“AAA” batteries x 2) not included Power Adaptor : Input AC 100-240V 50- 60 Hz Output DC 5V 1500mA RESETTING If the system does not respond or exhibits erratic or intermittent operation, you may have experienced an electrostatic discharge (ESD) or a power surge that triggered the internal microcontroller to shut down automatically.
12. Do not dispose this product into usual household garbage at the end of its lifecycle; hand it over to a collection center for recycling the electrical and electronic appliances. By recycling, some of the materials can be reused. You are making an important contribution to protect our environment. Please inquire your community administration for the authorized disposal center.
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S www.denver-electrionics.com Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly. Electric and electronic equipment is marked with the crossed out trash can symbol, seen below.
