Instruction Manual Clock Radio CRL-340 www.denver-electronics.com Before operating this product, please read this instruction manual carefully and completely.
1. Function 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Led time display in 12H-24H format White and color light Sunrise simulation wake up light Sunset simulation sleep light Touch mode Wake up to natural sounds or FM radio FM Radio and antenna built in Power supply: DC 5V, 1 x CR2032 battery, or USB cable 2. Diagram EN EN Time display Time display Down Down Alarm Alarm Current time Current time Sunset Sunset Up Up Battery Battery Speaker Speaker USB 5V USB 5V Antenna Antenna 3. Operation 3.
.3 Setting the clock time 3.3.1. When you plug in the light for the first time, or when there has been a power failure, the clock display will flash and you have to set the time. Use the buttons to set the hour and press the button to confirm. Repeat to set the minutes. 3.3.2. To adjust the time displayed, press and hold the buttons to set the hour and press the button for 3 sec until the hour display starts to flash. Use the button to confirm. Repeat to set the minutes.
Pressing the button will stop the light and sound for 5 minutes. The sound will then start playing again and the light will come on and increase in intensity for 5 minutes. Hold the button for 3 sec to switch off the light. If the FM radio is playing at the alarm time, it will switch off and the wake-up light sound will play. When the wake-up sound stops, the radio will resume playing. 3.7 Sunset light simulation 3.7.1. Touch the button to set the sunset light simulation.15 will be displayed.
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly. Electric and electronic equipment is marked with the crossed out trash can symbol, seen above.