Operation Manual

4. In the alarm setting mode, press the ALARM 1/ ALARM 2 repeatedly to cycle through
the setting options:
Alarm hour time > alarm minute time > Alarm frequency (see note 1) > Alarm
sound source (see note 2) > Light intensity
• Press the FORWARD button to adjust the values in each setting option. Press and hold
the button to change the values quickly.
• Press the ALARM 1/ALARM 2 button to confirm each setting option.
• Once settings are done, the alarm is enabled and the corresponding AL 1/ AL 2
icon will show
Note:
1. In the alarm frequency setting, you can select the following:
1-5 = Monday to Friday, 1-7 = Everyday, 6-7 = Weekend only, 1, 2, 3, 4, 5, 6 or 7 =
Once a week only (on the selected day)
2. Select the buzzer (“bu” shows on the display), the radio (the last played radio
frequency shows on the display), or nature sound (“nS” shows on the display) as the
alarm sound source.
All alarm sound sources will increase their volume gradually when the alarm sounds.
If the radio is selected as the alarm sound source, you are prompted to select the radio
maximum volume when the alarm sounds.
If the nature sound is selected as the alarm sound source, you are prompted to select
the type of nature sound and then the maximum volume when the alarm sounds.
Alarm wake-up light
• The wake-up light can be set at a light intensity level from L01 to L20 or off. If a light
intensity level from L01 to L20 is set, the light will switch on at its lowest intensity 30
minutes before the set alarm time.
• The light will then gradually increase to the set maximum brightness until the alarm
goes off. For example, if the alarm is set for 8:30 with a light intensity of L10, the light
will switch on at 8:00 at the lowest level (L01) and gradually increase to the light level
L10 at 8:30.
• The light will not turn on if the alarm is set less than 30 minutes before the set time.
Turning the alarms on or off
When the clock time is displayed, press and hold the ALARM 1 or ALARM 2 button to
enable or disable the respective alarm. The corresponding alarm icon (AL1/ AL2) will
switch on when the alarm is enabled.
Deactivating a sounding alarm
• Press the LIGHT ON/OFF button to temporarily silence the alarm (snooze) and then
press the ALARM OFF button to switch off a sounding alarm.
• When the alarm sounds, the corresponding alarm icon (AL1 or AL2) flashes on the
display.
• The alarm will continue sounding for 30 minutes if no button is pressed. Then it will
stop automatically until the same time next day.
Sleep
• This sleep function defines the duration of time before the radio switches itself off
automatically.