Instruction manual

POWER CONNECTION
Plug the AC power cord to a household outlet AC source. This unit is
equipped with a battery backup system, it requires a 3V CR2032 at
lithium battery (not included). Insert the battery in the battery
compartment,
making certain that the positive and negative (+ and -) battery terminals
are attached to the corresponding terminals on the plate in the battery
compartment. If an AC power failure occurs; the clock automatically
switches to the battery power supply, the clock and timer memory
continue running. When the AC power resumes, the clock switches
back
to AC again.
1. TIME AND CALENDAR SETTING
A. Setting Time and Calendar – Press Mode set button (11) in normal
mode and keep depress over 2 seconds to enter time set mode,
after enter the setting mode, press mode set button (11) to change
the mode cycle as follows :
Normal → Year → Month → Day → 12/24 H → RTC Hour → RTC Min →
Normal
- Action (during data adjustment) :
- Press <</Month – Day / °C/°F button (2) to adjust data backward.
- Press >>/ Year / DST button (6) to adjust data forward.
- Keep depress << or >> button for 2 seconds to enable auto
forward.
B. Setting Alarm 1 and alarm 2 – Press Alarm set button (9) during
normal mode and keep depress over 2 seconds to enter alarm set
mode, after enter the setting mode, press Alarm set button (9) to
change the mode cycle as follows :
Normal
→ AL 1 Hour → AL 1 Min → AL 1 weekend Alarm → AL 2 Hour
→ AL 2 Min → AL 2 weekend alarm → Normal
Select alarm weekday mode as follows
1-5 : Monday to Friday
1-7 : Whole week
6-7 : Saturday & Sunday
1-1 : One day of week