Instruction manual

EN-4
Display Settings
1. Press MENU
2. Rotate ROTARY to select SETTING and press ENTER.
3. Rotate ROTARY to select Display Setting and press ENTER.
• Screen Saver – set how many seconds to allow before the screen saver functions.
• Brightness – set the Level of LCD brightness.
• Power Save Mode - This mode will take effect depending on the time set on Screen Saver.
Screen Off will turn display off. Penumbra will dim the brightness to save power.
4. Rotate ROTARY to select Wallpaper and press ENTER.
5. Rotate ROTARY to select the desired wallpaper image and press ENTER to save.
Restore Settings
1. Press MENU
2. Rotate ROTARY to select SETTING and press ENTER.
3. Rotate ROTARY to select System Setting and press ENTER.
4. Rotate ROTARY to select Restore and press ENTER.
5.PressYEStoconrm.
System Information
Shows hardware informations like memory size and availability, etc.
1. Press MENU
2. Rotate ROTARY to select SETTING and press ENTER.
3. Rotate ROTARY to select System Information and press ENTER.
Power Reset
You can turn off and restart the player by pressing RESET button if something not normal is hap-
pening to the unit.
Connecting the computer for data le transmission
1. Connect one end of the USB cable to the USB port of the computer and the other end to the
unit’s mini USB port.
2. Press and hold . Computer will show 2 Removable Disk. One is the internal memory and
other is the memory card slot memory.
3.Copymedialesdirectlyintothestoragelocation.
Note: For Windows Vista users, after copying les into the unit, disconnect the USB cable then
press and hold for 10 seconds to turn on unit.
Connecting SD/MMC Memory Card
Inserting: Insert the memory card following the drawing direction printed at the back of unit.
Ejecting: Slightly push the memory card inwards and it will bounce out by a section. Pull out the
card.
CLOCK OPERATIONS
Setting Time and Date
1. Press MENU
2. Rotate ROTARY to select CLOCK and press ENTER.
3. Rotate ROTARY to select Time and press ENTER.
4. With Time selected, press ENTER to activate settings.
5. Rotate ROTARY to set hour. When done, press to set
minute.
6. Rotate ROTARY to set minute. Press ENTER to save settings.
7. To set date, rotate ROTARY to Date and press ENTER.
8. With Date selected, press ENTER to activate settings.
9. Rotate ROTARY to set day. When done, press to set month.
10. Rotate ROTARY to set month. When done, press to set year.
11. Rotate ROTARY to set year. Press ENTER to save settings.
12. Press CLOCK to switch to clock mode.