Instruction manual

EN-8

AUX-IN

You can transfer sounds of portable device to this unit through

the AUX-IN port.

1. Insert one end of the supplied 3.5mm AUX-In cable to unit’s

aux-in port and the other end to the portable device’s output

port.

2. Press MENU

3. Rotate ROTARY to select AUX and press ENTER.

Tips: The supplied AUX-IN cable also serves as FM antenna.

TECHNICAL SPECIFICATION

PLAYER SECTION

Support format : MP3 / WMA / OGG / JPEG / BMP / GIF / MPEG4 / WMV

Internal memory : 2GB

Signal to noise ratio : > 60dB

Channel seperation : > 50dB

Frequency response : 20Hz – 20KHz

TUNER (FM only)

Frequency range : 87.5 – 108MHz

Sensitivity : 22dBµV

Stereo seperation : 25dB

Channel step : 100KHz

GENERAL

Power supply : 7V DC Adapter or 1.5V x 4pcs Battery (AA size)

Speaker output : 0.8W x 2ch

Speaker impedance : 4 ohm

Earphone output : 20mW (32ohm)

DC power consumption : 5 Watts

Note: Specication and the design are subject to possible modication without notice due to

improvements.

Instructions on environment protection

Do not dispose of this product in the usual household garbage at the end of its lifecycle; hand it over at

a collection point for the recycling of electrical and electronic appliances. The symbol on the product, the

instructions for use or the packing will inform about the methods for disposal.

The materials are recyclable as mentioned in this marking. By recycling, material recycling or other forms of

re-utilization of old appliances, you are making an important contribution to protect our environment.

Please inquire at the community administration for the authorized disposal location.

COPY RIGHT DENVER ELECTRONICS A/S