User Manual

• To cancel the snooze period and the alarm, press ALARM OFF button.
Setting Sleep mode
• This sleep function defines the duration time before the radio switches off automatically.
• When the radio is switched on, press the SLEEP button repeatedly to select a sleep
period (Options: 90, 80, 70, 60, 50, 40, 30, 20, 10 and Off minutes).
• The radio will automatically switch off when the sleep period is over.
• Press the SLEEP button to check the remaining time before the radio switches off.
• Press the POWER button to cancel this function.
Using Qi wireless charging
IT IS SUGGESTED TO CHARGE YOUR PHONE WITH A WIRED CABLE INSTEAD OF A
WIRELESS CHARGER DURING PHONE SOFTWARE UPDATE.
OTHERWISE, CHARGE YOUR PHONE FULLY BEFORE THE PHONE SOFTWARE
UPDATE.
Place your Qi enabled smartphone on the center of the Wireless charging pad.
For best connectivity, align your phone with the alarm clock.
Wireless charging indicator
Wireless Charging Indicator light is displayed on the right upper corner of the product
display. Refer to the Light status indicators below:
1. Off: Stand-by Mode
2. Solid Blue: Charging
3. Blinking Red: Abnormal
*If the charging indicator blinks red:
- Check if your device supports Qi wireless charging
- Place mobile device in the center of the Wireless charging pad
- Remove any protective cases containing magnets, metal, or materials thicker than
0.12" (3 mm)
Built-in USB charger for charging external device
Connect an external device (e.g. smartphone, MP3 player) via a USB cable (not provided)
to the USB jack on the back of the radio for charging. The radio cannot access the contents
in the connected external device.
Resetting the device
If the system does not respond or exhibits erratic or intermittent operation, you may have
experienced an electrostatic discharge (ESD) or a power surge that triggered the internal
microcontroller to shut down automatically. If this occurs, disconnect the AC POWER CORD
from the wall and remove the backup battery from the compartment. Wait at least 3 minutes,
and reinsert the battery for the back-up, and then reattach the AC Cord to the wall. The unit
is now reset, and you will need to set up the unit time and alarms again.
Specifications
Tuner Range FM: 87.5 – 108 MHz
Number of preset radio station 10