Operation Manual

EN-11
SETTING THE MPEG4 PLAYER
You can exibly customize the unit to suit your preference. You can set the language and other video and audio settings so
when playback starts it will always use your preferred settings.
Important:
1. Play any video le before you can access the setup.
2. Press Setup on the remote control.
3. Use ( / ) to return / enter category.
Settings
System Setup
Language Setup
Video Setup
Category
TV System
Auto Play
TV Type
Password
Rating
Default
OSD Language
Audio Language
Subtitle Language
Menu Language
MPEG4 Language
Brightness
Contrast
Hue
Saturation
Sharpness
Options
NTSC, PAL, AUTO
ON, OFF
4:3PS, 4:3LB, 16:9
Setup password
Setup rating level
Restore to factory settings
Select preferred options appear on screen
Use navigation keys on remote control to setup
desired level.
Setting Rating Password
1 Press Setup on the remote control.
2 Using Navigation keys select System Setup > Password and press Enter.
3 Enter the default password ‘0000’ and press Enter to unlock rst and then enter new 4 digit password and press Enter.
The unlock logo will switch to lock indicating password has been set.
Note:
- The default password is ‘0000’.
- In case you forgot your password, you can use the master password ‘0000’ to unlock and reset the password.
- Master password will only work while SETUP button is press during playback.