Operation Manual

POWER SUPPLY
OPERATING THE UNIT ON AC POWER
Insert one end at the supplied power cord to the DC 6V IN Jack located at the rear of the unit and
the other end into the Wall outlet.
If the unit is used for the 1st time, the cord has to be firmly pushed into the socket to ensure it is
connected and ready to be powered.
OPERATING THE UNIT ON BATTERIES
1. To play your unit on batteries, the AC power cord must be disconnected from the player.
2. Unplug the AC power cord from the unit and insert 4 size ÒAAÓ batteries (not provided) in the
compartment.
3. Close the battery compartment door.
Check your batteries regularly. Old or discharged batteries should be replaced. If the unit is not to
be used for sometime or is being run exclusively on AC electrical current, remove batteries from
the battery compartment to avoid leakage.
Before using the unit. Check that the local mains supply is compatible with the Unit Do
not plug or unplug the power cable when your hands wet.
When planning not to use this unit for long periods of time (i.e. Vacation etc.) disconnect the plug
from the wall outlet.
1. LCD Display
2. TUNING+ button
3. ENTER AUTO-SCAN button
4. TUNING- button
5. ALARM/SLEEP/SNOOZE button
6. STANDBY button
7. PRESET button
8. INFO/SETUP button
9. DAB/FM button
10. VOL- button
11. VOL+ button
12. SPEAKER
13. BATTERY COMPARTMENT
14. AUX Jack
15. PHONES Jack
16. DC jack
17. POWER ON/OFF button
18. ANTENNA
LOCATION OF CONTROLS
ENG-2