Operation Manual

ManualsBrandsDenver ManualsMiscellaneousDCH-600

ENG-1 ENG-2

(1) This product is not a toy,it's a piece of complicated equipment which integrated with

professional knowledge by mechanic,electric, air mechanics, high-frequency transmitter

and so on, so it should be installed correctly and adjusted to avoid any accidents. The

owner must always operate in a safe manner, if improper operation that caused human

injured or property damage, then we DENVER ELECTRONICS A/S accept no liability for

any safety duties from operation. As we have no control over the way they maintained,

used and operated.

(2) This product is not suitable for users under 14 years of age

(3) The use of the drone may be prohibited in some areas like train stations, airports,

aircrafts, inhabited areas etc. You should check with the authorities whether the use of

the drone is permitted in some public or private areas. Always use the drone bearing in

mind not to breach people's privacy. We exclude liability for any wrong use of the drone.

(4) We DENVER accept no liability for any safety duties or nes arising from operation,

usage or mis-control after the sale of products. Warranty does not cover if drone crashes

and get damaged.

Keep away from crowd when ying, since drone ight is a high risk hobby.

Mis-assembled or broken main frame or defective electronic equipment or unskilled

operation may cause accidents of machine damaged or injured. Please pay special

attention to safety operation.

(1) Keep away from people and obstacles

"The ying speed and status of the drone is uncertain,so it may cause potential danger."

When choosing a ying site should stay clear of buildings, trees and power lines. AVOID

ying in or near crowded areas. Meanwhile avoid ying in rain, storms,thunder and

lightening to protect machinery and parts out of damage.

(2) Keep away from Humid environments

Inside of drone is made up of precise electronic components. Stay away from humidity

or water vapor to protect machinery and parts.

(3) Safety operation

Please y your drone according to your physical status and ight skill. Fatigue, listlessness

and mis-operation will increase possibilities of accidental hazard.

(4)Keep away from rotating blades

Keep your face and body as well as all spectators away from the rotating blades. The

spinning blades of a model of this type can cause serious injury.

(5) We recommend to y the drone below 10 meters of height.

A drone is made up of metal, ber,plastic,electronic components,etc. So keep it away

from heat and sunshine to avoid distortion, and damage.

1.Instructions

Please read the user handbook carefully and then keep it in a safe place for future

consultation and maintenance.

1.1 Important Notice

1.2 Safety Precautions

1.3 Check List Before First Flight

DENVER DCH-600

(1) Flying eld should be in an open space and we suggest at least

5M length *5M wide*3M height.

(2) Make sure the drone is fully charged.

www.facebook.com/denverelectronics

Summary of content (6 pages)

PAGE 1
.Instructions Please read the user handbook carefully and then keep it in a safe place for future consultation and maintenance. 1.1 Important Notice DENVER DCH-600 (1) This product is not a toy,it's a piece of complicated equipment which integrated with professional knowledge by mechanic,electric, air mechanics, high-frequency transmitter and so on, so it should be installed correctly and adjusted to avoid any accidents.
PAGE 2
LED Signal Lights (3) please strictly obey the order of turn-on, turn-off before operation.Whenstarting your flight,first turn on the transmitter,and connect power cable of drone last; When finishing your flight,please disconnect the power cable of your drone first,turn off transmitter last. An upset in the order of connection may cause your drone loose control to threaten yourself and others safety. Please follow a correct habit of turn-on and turn-off.
PAGE 3
1. The blade guards are removable. To install each blade guard, press the square area at the bottom of the guard against the matching section of the drone. Use the supplied screws to attach each of the 4 guards. 2. Keep the guards installed to protect the drone and users, or remove the guards for lighter weight and more speed and maneuverability. Note that the blades (propellers) are easy to replace, but each blade is different. If the incorrect rotation-style of blade is used, the quadcopter will not fly.
PAGE 4
PRE-FLIGHT ADJUSTMENTS NOTE: The drone will not operate unless you follow these steps in the order listed. FLIGHT CONTROL 1. Up / Down (Throttle) Push the LEFT STICK forward to make the drone go up, or backward to go down (throttle). The throttle will stay where you leave it. 1. First make sure the drone is OFF. Turn the controller / receiver ON. This procedure must be followed precisely for the controller and drone to find and bind with each other. 2.
PAGE 5
6. Adjust Left/Right Trim (Roll) If the drone drifts to the side when the stick is centered, click this switch left or right until the drone is stable. 7. Adjust Forward/Backward Trim (Pitch) If the drone drifts forward or back when the stick is centered, click this switch forward or backward until the drone is stable. FLIGHT MODES Press the Mode button on lower right of the controller to switch between Flight Mode 1 (maximum Gyro-stability) and Mode 2 (3D expert control).
PAGE 6
Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly. Camera Button Video Button INSTALLATION OF PROPELLERS 1. Propellers replacement If the propeller is damaged in the flight, you can replace with included spare propeller according to below steps.