24”LCD TV WITH DVB Model NO.
Contents Contents Caution Safety Information 2 3 Introduction 1. Front View 2. Rear View 3. Remote Control 4-7 4 5 6-7 Basic Operation 8 OSD Menu 1. PICTURE menu 2. SOUND menu 3. FUNCTION menu 4. TV menu 5.
Caution Caution is intended to alert the user to the presence of un-insulated "dangerous to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety Information Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety • The TV set should only be connected to a mains supply which matches that stated on the label on the mains adaptor • To prevent overload, don't share the same mains supply socket with too many other items of equipment.
Introduction Introduction 1. Front View Led Indicator Remote Control window(Keep clear) 1. (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby)LED Indicator: Press POWER to turn on and off. Indicator on(Red) Indicator on(Null) Standby mode Power on mode The effective receiving range for the signal is 5-8 metres from the front of the remote control window, and 300 to the left or right side and 200 above or below the remote control window. 2.
Introduction Common interface 2. Rear View 12 11 10 9 8 USB 1 2 3 4 5 6 7 1. POWER: Connect to the mains adaptor. 2. USB: For software update only. 3. HDMI : Connect it to the HDMI of DVD or other equipment. 4. VGA: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC. 5. PC-IN: Connect it to the audio output terminal of PC. 6. SCART: Connect them to the SCART video output terminal of DVD.(used in component source) 7.
Introduction 3. Remote Control The remote control is using Infra-Red(IR). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle. POWER(red button): Turn the TV on/standby. TV/TXT CANCEL REVEAL HOLD SIZE SUBPAGE INDEX INPUT MENU REC EXIT DVB Buttons for TELETEXT operating You could use the buttons only in TELETEXT . TV/TXT: Turn off/on the Teletext display. CANCEL: Cancel the Teletext display.
Introduction Buttons for Media functions TV/TXT CANCEL REVEAL HOLD SIZE SUBPAGE INDEX INPUT MENU REC DVB EXIT TV/RADIO FAV DISPLAY FAV+ LANGUAGE FAV- : Play/pause. : Stop . : Fast reverse. : Fast forward. : Previous chapter. : Next chapter. Buttons for DTV operating TV/RADIO: Disc menu change between DTV and Radio. FAV: Display the favorite program list. FAV+/-: Favorite program up/down. PIC FORMAT: Press to change the display mode of the screen: 4:3, 16:9.
Basic Operation Basic Operation Power on/off 1. Connect to the power supply with a power code and an adaptor(page 9). 2.-To turn on the TV Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control. Input Source select Press INPUT button on the TV set or remote control to display the input source menu, and use CH+/- button on the TV set or ∧ / ∨ button on remote control to select the input source, press OK button on the remote control to enter.
OSD Menu OSD Menu 1. PICTURE menu(TV mode for example) PICTURE PICTURE MODE PERSONAL BRIGHTNESS 50 CONTRAST 50 COLOUR 50 SHARPNESS 5 TINT 50 COLOUR TEMPERRATURE MOVE NORMAL ADJUST MENU EXIT Description PICTURE MODE: Select between STANDARD, MOVIE, MILD, GAME, PERSONAL. You may select the picture mode directly by pressing the PICTURE button on the remote control. Personal: You can adjust the Brightness ,Contrast, Colour, Sharpness to your own taste.
OSD Menu 2. SOUND menu(TV mode for example) SOUND SOUND MODE PERSONAL BASS 50 TREBLE 50 BALANCE 0 MOVE ADJUST MENU EXIT Description SOUND MODE: Select between: STANDARD, MUSIC, VOICE, THEATRE, PERSONAL. You may select the sound mode directly by pressing the SOUND button on the remote control. BASS: Low frequencies intensity. TREBLE: High frequencies intensity. BALANCE: Left and right stereo audio channels balance.
OSD Menu 3. FUNCTION menu(TV mode for example) FUNCTION LANGUAGE ENGLISH VIDEO SIZE FULL TT LANGUAGE WEST EURO SLEEP TIME OFF OSD TIME Press ∧ / ∨ button 30 SECONDS BLUE SCREEN the items hidden. to display ON RESET MOVE ADJUST MENU EXIT CHILD LOCK INSTALLATION Description LANGUAGE: Select the OSD language. VIDEO SIZE: Select screen size between FULL, 4:3,or AUTO(Auto could be select only in SCART mode). TT LANGUAGE: Select TEXT language(Used in TV mode only).
OSD Menu INSTALLATION: Enter the FIRST TIME INSTALLATION menu by pressing > button on the item. Change the settings according to your actual conditions, and select "YES" item to start auto tuning, or select "NO" to cancel.
OSD Menu 4. TV menu(TV mode) TV COUNTRY OTHER AUTO TUNING MANUAL TUNING CHANNEL EDIT MOVE ADJUST MENU EXIT Description COUNTRY: Select Country for tuning. AUTO TUNING: Pressing > button on the item, then select "YES" and press OK button to start auto tuning, or select "NO" to cancel. MANUAL TUNING: Enter the MANUAL TUNING menu by pressing > button on the item. MANUAL TUNING CHANNEL 001 SOUND SYSTEM BG COLOUR SYSTEM PAL AFT OFF MANUAL TUNING 800.
OSD Menu FAV,SKIP,LOCK: Select the desired channel with ∧ / ∨ button, and operate with GREEN, YELLOW, BLUE buttons, press the color button again to cancel the operation. FAV: Press GREEN button on the remote control to set the channel as favorite channel. SKIP: Press YELLOW button on the remote control to skip the channel. The channel that is skipped can not be programed when you scan channels with CH+/button. LOCK: Press BLUE button on the remote control to lock the channel.
OSD Menu 5. DTV menu(DTV mode) DTV CH. MANAGE AREA OTHER AUTO TUNING MANUAL TUNING ADVANCED SETTING TIMER NATIVE GAME MOVE ADJUST MENU EXIT Description CH. MANAGE: Enter the CH.MANAGE menu by pressing > button on the item. DTV\CHANNEL MANAGE CH. ORGN. CH. SORT CH. GROUP DEL TV CH. DEL RADIO CH CH. ORGN: Enter the Channel Organizer menu by pressing > button on the item. Fav: Set the favorite channel by RED button. Del: Delete the channel by GREEN button.
OSD Menu CH.GROUP: Enter the Channel Grouping menu by pressing > button on the item. You could grouping the channels by selecting the group number (1-8) you can see on the right. DEL TV CH.: Press OK button and select YES to delete all TV channels, or select NO to cancel. DEL RADIO CH.: Press OK button and select YES to delete all radio channels, or select NO to cancel. AREA: Select the suitable area.
OSD Menu 6. HDMI/YPbPr menu(HDMI/YPBPR mode) HDMI/YPBPR H POCITION V POSITION POSITION RESET MOVE ADJUST MENU EXIT Description H POSITION: Adust the horizon position of the picture. V POSITION: Adust the vertical position of the picture. POSITION RESET: Press > button to reset the setings above. 7. PC menu(PC mode) PC H POCITION V POSITION PHASE CLOCK AUTO SYNC MOVE ADJUST MENU EXIT Description H POSITION: Adust the horizon position of the picture.
Media operation Media operation 1. Connect the USB device to the USB jact on the back of the TV(page 6), 2. Press INPUT button on the TV set or remote control to display the input source menu, and use CH+/- button on the TV set or ∧ / ∨ button on remote control to select "MEDIA", press OK button on the remote control to enter, and the screen will display as the picture below. Use < / > button to select between MOVIE, MUSIC, PHOTO. and press OK button to enter.
Media operation FILE MANAGER: Press OK button to enter the FILE MANAGE menu. You can play the file by press RED button; Delete the file by pressing GREEN button; Delete all files by pressing YELLOW button; Press BLUE button to zoom the picture or out of ZOOM. DEVICE LIST: Press OK button to enter the DEVICE LIST menu to see the device information. SUBSCRIBE: Press OK button to enter the WAKEUP TIMER menu to set the Wakeup Timer. 1. Select the channel group from the tabel; 2.
Simple Troubleshooting Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions.Remember to check the peripherals topinpiont the source of the failure. If the display still fails to perform as expected,connect your helpline for assistance. No power - Check all connections to the TV. - Press either the power button or the Standby button on the Remote control.
Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly. Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below.