Instruction Manual " PORTABLE 7 TFT LCD COLOR TELEVISION SET CH STAN + POWER MU TE TV/ AV1/ AV2 AV/TV CH- CH+ MENU VOL- V- MEN U V+ CH - VOL+ AUTO REMO TE CO NTRO L Dear Customers: Thanks for your purchase of the product. To ensure the best efficiency and safety of the product, please read carefully this manual before your connection, op eration or adjustment and keep your manual well with you. MODEL NO.
9. Accessories List Quantity Name AC Adaptor Remote Control 1 piece 1 piece AV Cable RCA Jack 1 piece Car Power Cord 1 piece Car Stand 1 piece Instruction Manual 1 piece External Antenna Adaptor 1 piece Fixed screws(PWA3*14) 4 pieces Battery Compartment 1 piece ALL RIGHTS RESERVED COPY RIGHT DENVER ELECTRONICS A/S www.denver-electronics.
8. General Troubleshooting TABLE OF CONTENTS Check the following points before assuming malfunctions of the TV set: Phenomenon No picture & sound Reasons Improper connection of AC adaptor or car adaptor. The batteries are run down or the poles of the batteries are set adversely. No picture TV reception channel is not right and try to reset the unit. Relocate the TV set to the place where reception is better. No sound Sound volume is too low.
1. User Safety Instructions Please use specified voltage for this unit. Damage or malfunction might be caused when the range is exceeded. Important: Warning: ！ Caution: -Using incorrect voltage may cause damage or malfunction of the TV. -Please operate or connect the unit according to the manual. -Please do not use thinner or other chemical cleaners. -Please use a soft cloth to wipe off the dirt on the unit. -Do not expose the TV set to extreme temperature.
2. General Parts 1). TV Unit 5. Operation Instructions 1. Connect the power adaptor (DC12V) to the unit. 2. Switch on the main Power switch on the front panel of the unit and the red light on in standby mode; then press the Power switch again and the green light on in working status. 3. Select AV/TV to receive AV/TV signal. 4. Press CH+ or CH- knob to select the desired TV channel; Keep pressing V+ and V- konb to set the sound to a suitable level. 5.
13. Antenna Jack 18. Car Stand 14. AV IN Jack 15. Headphone Jack 8. Standby Mode 9. Screen Display with 16:9&4:3 Functions 10. Headphone Jack 11. Supporting With OSD Language in English \ German\ Spanish\ Italian 4. Connections 16. Power Source Input Jack 17. Power ON/OFF Switch 20.
Press CH knob to select the row, then press V knob to selec t the desired c hannel numbe r. E.g .To change the frequency si gnal of chann el 3 to the frequency signal of channel 8 as a bove. Press V knob to confi rm and press m enu to releas e. =Timer Control - Clock e.g. 02:12(To disp lay the operat ing time) Press CH kn ob to enter, th en press the number knob on the remote control to set the tim e. e.g.19:20 to enter 1920 . OFF e.g.
- Bright ness To adju st the picture if it s too bright or dark. Contra st To adju st the picture if it ’ s too bright or dark. Color To adju st the color de nsity. Sharpn ess To adju st the picture clearness. Tint To adju st the best col or under N system signal. - - =VOLUM E CONTROL Press CH knob to enter, then adju st volume by V+ or V- knob . You also ca n press v+(9 ) or v- (2) con trol directly o n the remote c ontrol.
