Specifications

Y
Cb/Pb Cr/Pr
INPUT
S-VIDEO
VIDEO
L
SRSW
SL
C
L
R
R
VIDEO
S-VIDEO OPTICAL COAXIAL
5.1CH
IN
OUT
TV75
ANTENNA
DIGITAL OUTPUT
VIDEO OUTPUT
OUTPUT
AUDIO OUTPUT
Y
Cb/Pb Cr/Pr
INPUT
S-VIDEO
VIDEO
L
SRSW
SL
C
L
R
R
VIDEO
S-VIDEO OPTICAL COAXIAL
5.1CH
IN
OUT
TV75
ANTENNA
DIGITAL OUTPUT
VIDEO OUTPUT
OUTPUT
AUDIO OUTPUT
12 41
System Setup
Record Quality
1. In the Recording Settings menu, use the or button to
select the Default Quality item, and press the SELECT
button to drop down a menu.
2. Use the or button to select a desired value and press
the Select button.
3. Press the RETURN button to return to the upper level
menu and set up other items.
* For the differences of the six quality levels, SP, SP+, LP,
SLP, EP and HQ, see the glossary for reference.
APS(Auto program scan)
The unit has a channel tuner. You can receive TV signals directly from the unit. Before the tuning, you must
conduct a channel scan to enable the unit to tune in various channels automatically and determine their frequencies.
The tuned channels will be saved automatically. Even if the power is off, the saved channel information will not
be lost. Press the SETUP button to enter the System Setup mode. Use or button, highlight APS, select
it, and the following chart will show.
The meanings of the icons:
1)press the or button to Select the APS item, as shown in the left top chart (if in TV channel state) .
2) Press OK button, shows the right top chart. The tuner will start searching through various channel frequencies
and add available channels to the system memory. This procedure may take several minutes.
3)When the scan is complete, TOTAL CHANNELS FOUND will appear on the screen with the number
of channels that have been stored to memory. Press the SETUP button on the remote control to exit.
Modify Channel
Use the or button to Select the Modify Channel item, in dialog chart select OK. As shown in the following chart .
Auto Chapter Marker
Record Quality
APS
Modify Channel
Program Table
Timer Setting Menu
Country Selection
1
SETUP MENU -RECORDING
Off
SP
SP+
LP
EP
SORT
OK
Deutschland
Confirm
Need stop current TimeShift before
AutoScan, and channel will be deleted.
OK to start auto scan, Cancel to exit.
CANCEL
OK
Scan channels
STOP
2% 63.80MHz
0 channel (s) found.
Modify channel information
P003
C h 0 3 4
PAL 1
Channel
Standard
C - 3 4
OK
Cancel
Program Number
Name
Standard
Search Type
Band
Channel
Fine Tuning
Delete
OK
Modify channel information
P003
C h 0 3 4
PAL 1
Frequency
607. 30MHz
OK
Cancel
Program Number
Name
Standard
Search Type
Frequency
Fine Tuning
Delete
OK
System Connection
In Audio Setup, set the Digital Output Mode to LPCM Output (For details, see System Setup-Digital
Audio Output for reference).
When using a digital signal output (coaxial or optical), the Analog Output cable is not needed for connection.
The Rear Panel of the Unit
Amplifier 1
5.1 Channel
Ordinary Cable
(Analog Output)
Connected to an amplifier with digital decoder
Connected to 5.1 channel Amplifier
The Rear Panel of the Unit
or
Audio Source Cable
Amplifier