Digital Set Top Box Operating Manual DMB-100HD DVB-T PLAYER
Safety Instructions Always read the safety instructions carefully Keep this Instruction Manual for future reference Keep this device away from humidity Lay this device on a reliable flat surface before setting it up Do not stand it on soft furnishings If any of the following situation arises, get the Set Top Box checked by a service technician: It has been exposed to moisture It has been dropped and damaged It has obvious sign of breakage It has not been working well or you cannot get it to work according t
Front Panel 1 2 - 1. 2. 3. 4. 5. CH 3 - + VOL 4 5 + Power switch button. PROG+/-¡¢VOL+/-. Remote receive sensor. LED indicator lamp. LED display panel. Rear Panel ~ 110-240V 50/60Hz ANT HDMI USB COAXIAL OUT IN 1 VCR SCART TV SCART 2 3 4 5 6 7 1. RF IN/RF LOOP THROUGH TV RF IN socket connects to your external aerial. LOOP THROUGH socket will bypass the input RF signal to another tuner. 2.
Remote Control Unit MUTE STANDBY 2 1 TV/RADIO 4 3 7 INFO LIST AUDIO 5 SUB.T 6 8 9 TEXT 10 12 11 FAV TV/VCR EXIT MENU 13 16 VOL- EPG 18 14 15 PROG+ OK PROG- VOL+ 16 17 RECALL 19 15 1)MUTE: Used to turn the sound on or off. 2)STANDBY: Used to switch the set top box to on and off. 3)NUMBER KEYS: Used to select channel numbers or input numbers in menus. 4)TV/RADIO: Used to switch between TV channels and Radio stations.
Installing the Batteries Remove the battery cover from the Remote Control and put 2xAAA size batteries inside the compartment. The diagram inside the Battery Compartment shows the correct way to install the batteries. 1.Open the cover O PE 2.Install batteries N 3.
First Time Installation After all connections have been made properly, switch on TV and make sure the receiver is connected to the Main Power. Press Power Button to switch receiver on. If you are using the receiver For the first time or restored to Factory Default, the Main Menu will appear on your TV screen.
(2) Program Edit To edit your program preferences (lock, skip, favourite, move or delete), you will need to enter the Program Edit Menu. This Menu requires a password to access. Enter the default password '000000'.
Move a TV or Radio Program/s 1. Select the preferred program then press the RED button. Amove symbol will appear 2. Press UP/DOWN to move the program 3. Press OK to confirm 4. Repeat the above steps to move more channels Lock Program/s You can lock selected programs for restricted view. Lock a TV or Radio Program: 1.Select the preferred program then press the YELLOW button. A lock-shaped symbol is displayed. The program is now marked as locked 2. Repeat the previous step to select more programs 3.
(6) Video Setting To access the Menu, press MENU then select [Picture]. The Menu provides options to adjust the video settings. Press UP/DOWN to select an option and press RIGHT/LEFT to adjust that setting. Press EXIT to exit the menu. Picture Aspect Ratio Resolution TV Format Video Output EXIT Return 16:9 Wide Screen 1080i PAL CVBS OK Confirm (1). Aspect Ratio You must set the display format to either 4:3 PanScan, 4:3 Letter Box,16:9 Full Screen or Auto to get the maximum display when watching TV. (2).
(7) Channel Search To access the menu,press MENU and select [Search Channel]. The Menu provides options to adjust the Search Channel settings. Select an option and press RIGHT/LEFT to adjust the settings. Press EXIT to exit the Menu. Channel Search Auto Search Manual Search Country Antenna Power EXIT Return France Off OK Confirm 1 . Auto Search Search and install all channels automatically. This option overwrites all preset channels. 1.
2. Press the RIGHT/LEFT key to select the channel frequency 3. Press OK to start searching channels If a channel is found, it is saved and added to the channels list. If channels cant' be found, then exit the menu. (3) Country Select your country of residence. (4) Antenna power Enable Antenna Power if an external active antenna is connected. (8) Time Setting To access the Menu,press MENU then select [Time]. The Menu provides options to adjust the time settings.
(1). OSD Language Select an OSD language (2). Audio Language Select the preferred audio language for watching TV channels. If the language is not available, the default program language will be used. (3). Subtitle Language Select the preferred subtitle language. (10) System Setting To access the Menu,press MENU and select [System].The menu Provides options to adjust the system settings. Press the UP/DOWN key to select an option and press RIGHT/LEFT to adjust the setting. Press EXIT to exit the Menu .
(3) Restore Factory Default Reset your Set Top Box to the Default Factory Settings. In Main Menu select [Restore Factory Default] and press OK or RIGHT to select. Enter your password or the default password '000000' and press OK to confirm. This option will delete all preset channels and settings. (4) Information View model, hardware and software information.
Troubleshooting Problem No picture Potential Reasons Power isn't connected What to do Connect the power The power switch is not on Switch on the power Screen shows No Signal No sound from speaker Only sound, no image on the screen Remote Control is not responding DVB-T cable not connected Plug in the DVB-T cable Incorrect setting Reset setting No or incorrect connection with audio cable Connect the audio cable correctly Sound on mute Turn off mute function Incorrect sound track Try another sou
Technical Specifications Item Sub Item Tuner Input Frequency 170~230MHz 470~860MHz RF Input level -25~-82dBm IF Bandwidth 7MHz and 8MHz Modulation QPSK,16QAM,64QAM Decoder Format MPEG4 AVC/H.264 HP@L4 MPEG2 MP@ML.HL Output Format 576P , 720P, 1080i, 4:3 and 16:9 Output Port HDMI Decoder Format MPEG-1 (layer1&2) Audio output Digital audio: S/PDIF Voltage AC 110-240V 50/60Hz Video Audio Power Parameter Working Power 8W Standby power 0.
Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly. Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below.