Instruction manual

FAQ – DENVER

Congratulations with your new DVB-T tuner. With this settop box you can enjoy

digital TV signal, and get HD channels in super quality.

To get the good signal, it takes a proper antenna, and good cables with proper plugs

and assembling. If you don’t have this, it can give bad receival of channels.

Active antenna: DENVER can give 5V to an active antenna. Ifyou want

to use this you have to turn it on in the setup menu.

Sorting channels: When you have tuned in channels, they will normally be placed in

the order they are received from the signal provider. If you want to change this order,

you have to turn off LCN in the setup menu. Then you can put in channels in the order

you want.

Auto shutoff function: By standard a powersave function is turned on, and it enables

the box to turn off after 3 hours if there is no interaction from user (remote control is

not used within 3 hours). This can be turned off in setup menu under ”auto standby”.

Record on USB: Your new DVB-T box can record on USB units. It is importnat that

the USB unit is formatted in FAT32, and if you use an external harddisc it need to

have its own powersupply. Otherwise it won’t get enough power. When you record

DVB-T singal, the filesize can be very large, especially from HD channels. Therefore

you should get a large USB stick or external harddisc if you want to record a lot.

Digital Sound output: Please notice that you won’t get any sound in your TV, if you

set digital output to RAW. This function is ment for use with external surround

amplifier. If you use TV as sound source, then please remember to keep digital

output as PCM.

Updates: For most of our models we will get updates with improvements. Please look

at our website: www.denver-electronics.com if there are any updates for the existing

model.

Problems & how to solve them:

•If a unit won’t record, then please check filesystem on USB stick/hdd. It is

normally because of wrong filesystem that the unit won’t record.

•If unit says ”no USB unit”. Then again, check filesystem. It has to be FAT32.

•Program is pixelating?? This is typically caused by bad antenna/receival.

Please make sure the antenna is correct. In Denmark you can use www.digi-tv.dk to

find correct antenna settings. In other countries, please check your providers

homepage.

•Box is turning off automatically??.. If the autostandby function is turned on,

the box will turn off after 3 hours, if you haven’t used the remote control. If you want

to turn this off, please do in setup menu. (recordings are being made even if

autostandby is turned on)

DMB-112HD