AUTO HOVER FUNCTION 4-AXIS DRONE DENVER DRO-121 Thank you for choosing this product. Please read this manual carefully before flying. Retain this manual for future reference. The images are for reference only.
CONTENTS ⚫ Remote control X1 ⚫ Quadcopter X1 ⚫ Protective guard x 2 ⚫ ⚫ 3.7V 350mAh ⚫ Propellers X4 Lithium battery X1 ⚫ Screwdriver X1 3.
CONTROLS One-button take-off/landing Forward trimming Leftward trimming Short press: 3D flip. This feature is not available in the aerial Speed button version. Press and hold: One-button rotation Throttle lever Rightward trimming Calibration One-button return Backward trimming Direction lever Power switch Light Emergency stop Headless mode REMOTE CONTROL BATTERY INSTALLATION 3 x AAA batteries 1: Use a screwdriver to remove the battery cover. 2: Install 3 x AAA batteries.
AIRCRAFT BATTERY CHARGING Insert the battery connector to the small end of the USB charger (ensure to connect tight and correct). Use the USB charger to charge the aircraft battery pack. Charging time: about 60 minutes. When the battery is charged completely, disconnect the USB charger. LED indicator USB When the LED turns off the battery is charging. When the LED lights up, charging is completed. Charging must be supervised at all times.
Step 3 Remove the drone’s battery after flight. Develop correct habits so as not to cause security risks. Warning: If the battery is not removed from the drone for long period of time, it may be damaged due to over-discharge, or even become a fire hazards. Li-PO 3.7V/350mAh Step 4 If the transmitter is not to be used for a longer period of time, remove the battery for storage. Turn off the transmitter. If transmitter is not to be used for a longer period of time, remove the batteries for storage.
When drifting forward, adjust the Trim button to rear until it is balanced When drifting backward, adjust the Trim button to forward until it is balanced. Leftward and rightward trim 2. When the aircraft is starting to take off and it drifts left /right. When drifting leftwards, adjust the Trim button to the right until it is balanced. When drifting rightwards, adjust the Trim button to the left until it is balanced.
When you are familiar with basic flight operations, you can do some awesome and exciting tricks an stunts! First of all, fly the aircraft to a height of more than 3 meters, press the 3D button on the rear right side of the transmitter, then push the right rudder (in any direction) to make 360 degree flip.
Please notice - All products are subject to change without any notice. We take reservations for errors and omissions in the manual. ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.
DENVER ELECTRONICS A/S Omega 5A, Soeften DK-8382 Hinnerup Denmark www.facebook.