MODEL TFD-1020DVBT 10" LCD TV DVD Combo
Table of Contents Contents Table of Contents 1 Safety Precautions 2 Box Contents 3 Identification of Controls Main Unit Remote control unit Insert the remote control battery System Connections Getting Started 4-7 4 5 6 6-7 7-12 SETUP Menu Setting(DVD/DVB) General Operation General Setup Page Speaker Setup Page Dolby Digital Setup Preference Page DVB-T Introduction Area / Time Zone / Parental Age Auto Scan Manual Scan Pewer Suppiy Preparation Rechargeable Battery Turning on the unit TV Setup Menu T
Safety Precautions Before using your TV, plesse read these instructions completely, and keep this manual for future reference. Carefully observe and comply with all warnings, cautions and instructions indicated on the unit or descrbed in the owner s manual.
Box contents TV set ZOOM Y MENU R G B Remote control External TV Antenna MODEL TFD-1020DVBT 10" LCD TV DVD Combo Audio/Video cable AC/DC Adapter Car Adaptor This User Guide If any of the accessories are missing, contact your dealer as soon as possible.
Identification of Controls Main Unit 1. SOURCE 2. SCAN :TV or DVB scan 3. MODE Enter TFT setup menu and TV setup menu in TV mode. 4. CH-/ (Down) 5. CH+/ (Up) 6. VOL-/ (Left) 7. VOL+/ (Right ) 11 8. SETUP: Enter DVD setup menu 12 9. ENTER. 10.EJECT: Open/Close disc. 11. Remote sensor. 1 2 3 4 5 6 7 8 9 12. 10 Standby/on led indicator 13.ANT: antenna input. 14.IN AV OUT: AV out/in switch 13 14 15 16 15.VIDEO: Video input/output. 16.USB: USB port. 17 24 17 17.AUDIO: Audio i nput/output.
Identification of Controls Remote control unit 1 .MUTE Disable Audio output. 1 2 17 18 2. POWER Switches Player ON and Standby. 4 .SUBTITLE Selects a subtitle language. 5.ANGLE/TTX Selects a DVD camera angle if available in DVD mode. Teletext key in DVB mode. 9 .ENTER Confirms menu selection. 10 .SETUP Enter or exit setup menu. 11 .ZOOM Enlarges video image. 12.REPEAT/DEL Repeat chapter, title, all in DVD mode. Delete channel in DVB mode. 13.TV/RADIO(DVB only) Switch TV and Radio channels. 20.
System Connections Identification of Controls System Connections Insert the remote control battery 1.Open the battery door. 2.Insert two AAA size batteries with correct polarity marked inside the compartment. Before you begin: Do not connect the power cord until all other connections to this player have been made. Ensure that you observe the colour coding of cables when connecting audio and video devices.
System Connections Connecting to External TV Connecting to a PC Use the AV cables to connect the external TV set to the AV input jacks on the left side of the unit, as shown below: Use the Mini D-Sub 15 Pin cable (not Supplied) to the connect the PC and the VGA input jack on the left side of the unit, as shown below: In DVD mode, set AV IN/OUT switch to ¡°OUT ¡±to output AV signal to the external TV. set AV IN/OUT switch to IN to input AV signal from the PC.
Getting Started Power Supply Preparation Using the Car Adapter The unit is supplied with a Car Adapter for powering the unit and charging the battery in a vehicle. Connect the car adapter power plug to the unit's DC IN 9V jack and the other end to the vehicle cigarette lighter socket as shown on the right. Car adapter Attention ØDo not operate the unit or view video while driving a vehicle. ØPlace the unit in a proper position for viewing. Rechargeable Battery Replacing the fuse of the car adapter.
Getting Started TV Setup menu To enter the TV Setup menu, press the "MODE" button. To exit the TV Setup menu, press it repeatedly. VOLUME General operation VOLUME 1. Press the MODE button repeatedly to display the menus in the following order: PICTURE->VOLUME->OPTION-> SYSTEM-> PRESET 2. To select a menu item, press the buttons to scroll up and down the list. 3. When a menu item is highlighted, use the buttons to adjust the setting. 51 VOLUME:Adjusts the VOLUME of the sound.
Getting Started TV menu (only if switched to TV mode) PRESET SYSTEM S-ROLOC S.SYS SWAP COPY AUTO SEARCH SEARCH FINE TUNE BAND VHFL POSITION 0 Skip OFF AUTO I 5 4 S-ROLOC:select a color system: AUTO,PAL,SECAM S.SYS: select a sound system: I, L,BK,DK SWAP: Use the buttons to highlight ¡°SWAP¡±The current channel eg.¡°4¡±will display on the right.Then, use the buttons to select the channel you want to swap, eg¡°5¡±.
Getting Started Playing a DVD or Video CD(Operation) Playback Setup DVD 1. Set the power switch to¡° I¡± at the left side of the unit. 3.To go directly to any chapter during DVD playback, input the chapter/track number . 2. Press SOURCE to select DVD mode, and insert your disc, with the playback side facing back. It will be loaded automatically. Changing the Audio Channel VCD Press AUDIO repeatedly during playback to select a different audio channel (Stereo, Left Mono, Right Mono or MIX-Mono). 3.
Getting started Playing a DVD or Video CD(Operation) N Note:Zoom may not work on some DVDs. Special DVD Features- Checking the contents of DVD discs: Menus DVDs may offer menus that allow you to access special features. To use the disc menu, press MENU. Input the corresponding number or use the buttons to highlight your selection.Then press ENTER. MENU 1. Press MENU.If the current title has a menu, the menu appears on the screen. Otherwise, the disc menu may not appear. 2.
Basic operation MP3/WMA Disc Features MP3 / WMA 1. Press buttons to select a folder, and press ENTER to enter the folder contents. 2. Press buttons to select a track then press or ENTER. Playback starts. MP3 / WMA disc compatibility with this player is limited as follows: 1.Sampling frequency: within 8 - 48 kHz( MP3 ),within 32 - 48kHz ( WMA ). 2.Bit rate: within 8 - 320kbps( MP3 ),32 - 192kbps ( WMA ). The player cannot read an MP3 extension other than MP3/WMA.
Basic operation Playing a JPEG Disc Viewing a JPEG Disc Using this DVD Player you can view Kodak PICTURE CDs and discs with JPEG files. 1.Insert a disc . The file menu appears on the TV screen . 2. Press the buttons to select a folder, and press ENTER. A list of files in the folder appears. 3. If you want to play a particular file, press then buttons to highlight the file and press ENTER or . 4.If it is a Kodak Picture CD it will be played automatically.
Basic operation Playing a DVD VR format Disc N Playing a MPEG4 Movie Disc This unit will play DVD-R/RW discs recorded using the DVD-Video format that have been finalized using a DVD-recorder. Using this DVD Player you can play MPEG4 disc. 1. Insert a disc .The folder menu appears on the TV screen. This unit will play DVD-RW discs recorded using the Video recording (VR) format. 2. Press the buttons to select a folder, and press ENTER. A list of files in the folder appears. 1. Insert a disc .
Basic operation Program playback(not for Picture CD/MP3) DVD/VCD/CD The program function enables you to select your favourite titles, chapters or tracks and play them in a favourite order. 1. Press PROG while the disc is playing The program menu appears. Notes: - Program can be activated only when a disc is in the DVD player. - When the program menu appears, the setup menu setting is not allowed.
Basic operation DIGITAL CARD and USB Device operation Digital cards (MMC/SD/MS) and USB device with MP3&Pictures (.jpg) may be played through the unit. How to play USB/SD/MMC/MS An example of USB mode menu as following: How to select USB/SD/MMC/MS. 1. Turn the unit on. 2. Insert either a USB device or a SD/MMC/MS card into the USB port or the card slot located on the left hand side of the appliance. USB Card USB Playing operations are the same as playing a Mp3 disc. 3.
SETUP Menu Setting(DVD/DVB) General Operation&General Setup Page General Operation 1.Press SETUP to enter the Setup Menu. 2.Press ENTER to enter the next level submenu or confirm your selection. 3.Press to enter the submenu or returen to the previous menu 4.Press to highlight the menu item.
SETUP Menu Setting General Setup Page ANGLE MARK Displays current angle setting information on the right hand corner of the screen if available on the disc. Dolby - - GENERAL SETUP PAGE - TV DISPLAY ANGLE MARK OSD LANGUAGE CLOSED CAPTIONS SCREEN SAVER CLOSED CAPTIONS Closed captions are data that are hidden in the video signal on some discs.Captions are different from subtitles because captions hearing are impaired by showing the sound effects(e.g.,"phone ringing" and " footsteps"),while subtitles cannot.
SETUP Menu Setting(DVD/DVB) Speaker Setup Page Dolby Digital Setup Dolby Digital Setup The options included in Dolby Digital Setup are: 'Dual Mono ' and 'Dynamic '. Speaker Setup Page The options included in Speaker Setup Page is 'Downmix'. Dolby Dolby - - ANALOG AUDIO SETUP PAGE - - - - DOLBY DIGITAL SETUP - - DOWNMIX DUAL MONO DYNAMIC GO TO SPEAKER SETUP PAGE GO TO DOLBY DIGITAL SETUP 1.Press SETUP. 2.Press to select the 'Speaker Setup page'. 1.Press SETUP. 2.
SETUP Menu Setting(DVD/DVB) Dolby Digital Setup Preference Page Stereo:Left mono sound will send output signals to Left speaker and Right mono sound will send output signals to Right speaker. L-Mono:Left mono sound will send output signals to Left speaker and Right speaker. R-Mono:Right mono sound will send output signals to Left speaker and Right speaker. Mix-Mono:Left and Right mixed mono sound will send output signals to Left and Right speakers.
SETUP Menu Setting(DVD/DVB) Preference Page MULTI-Select this if the connected TV, is muliti system. PAL - Select this if the connected TV is PAL system .It will change the video signal of a NTSC disc and output in PAL format. NTSC-Select this if the connected TV is NTSC system .It will change the video signal of a PAL disc and output in NTSC format. AUDIO,SUBTITLE AND DISC MENU These options set the Audio , Subtitle and Disc menu language .
SETUP Menu Setting Preference Page Auto Scan DEFAULT Setting the 'Default ' function will reset all options and your personal settings to the factory defaults and all your personal settings will be erased. Dolby In DVB mode, press PBC/SCAN key on the remote, then press ENTER to confirm. 1. 2: 3. 4. 5. - - PREFERENCE PAGE - TV TYPE AUDIO SUBTITLE DISC MENU PARENTAL DEFAULT There are two ways to start auto scan. PAL ENG ENG In DVB mode,Press " Setup" key. Go to DVB-T Setup page. Go to Channel Setup.
DVB-T Introduction Teletext Manual Scan Pressing the Angle/TTX button to turn on/off teletext stream display. 1.Press Setup key. 2.Go to DVB-T page. 3.Go to channel Setup. 4.Go to manual Scan and select " Start". 5.Press ENTER key. Manual Scan Status Found Channels Freq: 050500KHz Scan Press & keys to select the frequency you want Press number buttons on the remote directly Press the ENTER button twice to confirm Scan, or press PBC/SCAN key to cancel manual scan.
DVB-T Introduction EPG EPG(Electronic Program Guide) The EPG menu is used to look at what is being broadcast on a TV or radio channel later in the day. 1.To access the EPG menu, pressing PRO/EPG key on the remote control. 2.Select £¢program£¢ on the EPG Menu and pop up a program list of this channel in the day.
DVB-T Introduction OSD Adjust Channel £¢Adjust£¢ channel allow you to add delete your favourite channels and add your protected channels. Press DISPLAY key once/twice Means a deleted channel CH-01 Press key /FAV to set favorite channel,a red icon display beside the channel name. Means a locked channel CA 2155/95/95 ??:??:?? Audio: 00/00 CA Press key REPEAT/DEL to set £¢delete£¢ channel, a cyan icon display beside the channel name.
Information on disc compatibility Disc formats supported by this DVD player: DISC LOGO DVD DVD-R DVD+R DVD-RW DVD+RW CONTENTS Audio+Video SIZE 12cm MAXIMUM TIME 133min(SS-SL) 242min(SS-DL) 266min(DS-SL) 484min(DS-DL) CD Picture Audio Images (high resolution despite compression) 12cm 74min 12cm The operating characteristics of some DVD discs are specified by the software maker. Please refer to the instruction manual supplied with the disc for further instructions.
Troubleshooting Should you experience problems, please consult the troubleshooting guide below first. Symptom TV MODE Possible Fault Remedy USB, SD/MMC/MS The appliance does not work. No LED Power not connected to the mains. The fuse of the car adapter is blown Check the AC/DC adapter and AC mains cable are properly connected. Replace the fuse with same capacity The appliance does not work. The appliance is in standby mode. Press the power button on the remote control or TV.
Technical Specifications USB, card TV TV System Screen size Aspect ratio Resolution View angle Brightness (cd/m ) Contrast Response time Aerial input Audio output Mains power Power consumption Dimensions Weight Car adaptor USB port type USB maximum handling capacity Card type Card maximum handling capacity PAL BG/DK/I SECAM L/L 10.2” (diagonal) 16:9 800X3(RGB)X480 65¡ã(left)x65¡ã(right) x45¡ã(up)x65¡ã(down) 250( cd/m ) 300:1 35 ms 75 ohm 2x2 W DC 9V/2A 15W 270X120.
Please fill the blank with the model number of this player for future reference Model no.