User manual

1
*Do not overload wall outlets, extension cords or convenience
receptacles beyond their capacity, since this can result in fire or
electric shock.
*Do not use unsuitable (unprotected) power outlet,this may be
dangerous.
*Check the connection regularly. If there is any rupture or failure
in the insulation of the cable and the unit, disconnect immediately
and have the unit check by a qualified technician.
*Do not use the power cable connection anywhere near water or
liquids, such as bath, sink, swimming pool,laundry tub or inside a
wet/ moist basement, etc.
*Do not place the unit on an unstable object. The set may fall,
causing serious injury to a child or an adult and also serious
damage to the unit.
*Never place the unit near or on top of any heat radiating
apparatus, such as heaters, ovens, stoves, radiators, fan heaters,
amplifiers, etc.Also never expose the unit to direct sunlight as
this may lead to the unit overheating.
*Unplug the unit from the wall outlet before cleaning or polishing it.
Do not use liquid or aerosol cleaners, alcohol or other cleaning
sprays! Use a dry, soft cloth to clean the exterior of the unit only!
*Never place a heavy object onto the unit!
*Do not defeat the safety purpose of the power plug. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet. Do not force the plug into the
outlet!
*Protect the power cord from being walked on or pinched
particularly at plugs,convenience receptacles,and the point
where they exit from the apparatus.
*Unplug this apparatus during lightening storms or when unused for
long periods of time.
*Refer all servicing to qualified personnel. Servicing is required
when the apparatus has been damaged in any way.
*Switch off the main power when the unit is not in use. (Disconnect
the power plug from the power outlet when you do not intend to
use the unit for a prolonged period of time). Remove the disc
before moving or switching of the unit.
*Do not cover or touch any of the components inside the unit!
*Install the unit on a flat surface with good air circulation. Please
ensure the ventilation holes are not covered,otherwise the unit
will overheat and malfunction.
*Read through this manual before installation and use.
SAFETY INFORMATION