User Manual

GPRS Setting Steps
1. Insert microSD card and SIM to camera, put batteries in cam, screw antenna to it
then turn camera to test mode, check there are signal bar and ''SIM'' on the camera screen. Then connect the camera to the PC with
the included USB cable.
Insert CD to computer, open and then double click .
2. Choose or ,
Go to table, select .
3. Insert all
4. Fill in sender email info in and
5. Go to table,choose
6. Click button and save as Parameter.dat to microSD card.
7. Plug USB cable from camera.
8. Go to in cam menu, check the subsetting is the same with above setting.
9. Turn camera to on mode.
F. SMS Command List
MMS/SMTP need to be set ‘on' mode before using thes sms command
1 *500* take picture
(can work in both mms and smtp mode)
SIM in camera will send Capture when recieve *500* command
2. *505* take picture and send to the mobile who sends sms
sim in camera will send Start capturing.. and still send picture to inserted Mobile ID and/or email when got* 505* Command, no
matter MMS or smtp mode.
But sim will send images via MMS to the mobile who sends SMS when camera only in MMS mode
3.*520* check the picture quantity and battery status
(can work in both MMS and SMTP mode)
ENG-3