Operation Manual

ENG-18
Sleep
To activate the sleep function, either select it in the main menu by the use of the SELECT control or
repeatedly pressing on the SLEEP button. The display will show the sleep time and you can choose from:
Sleep Off, 15, 30, 45, 60, 75, 90 minutes.
Once the sleep time has been set, it will return to the main menu.
MUTE FUNCTION (remote control only)
Press the MUTE button on the remote to stop the sound from the speakers temporarily, the sound stops
and the display will show the mute icon and "Muted".
To cancel mute and restore the sound, press the MUTE button again or press the VOLUME+/-.
HEADPHONE JACK
A3.5mm type stereo headphone jack is located at the back of the unit. Connect a set of stereo
headphones (not included) to this jack for private listening without disturbing others. The speakers are
automatically disconnected when the headphones are in use.
IMPORTANT: When using headphones always set the volume to a low level before you put the
headphones on. Then insert the headphones and gradually increase the volume to a comfortable
listening level.
SPECIFICATIONS
Power Supply: AC/DC ADAPTOR INPUT: 100-240V~60/50Hz OUTPUT: 12V 1.5A
Output Power: 5W
USB port charging: 5V 1A
Unit Dimension: 180 (L) x 117.3 (W) X 110 (H) mm
Temperature: 5°C to 35°C; Humidity: 5% to 90%
Radio Section
Tuning range: DAB/DAB+ 174-240 MHz
FM 87.5-108 MHz
Aerial: Rod antenna
General
Terminals-Output: 3.5mm stereo headphone
Aux In: 3.5mm Jack
*** Specifications subject to change without notice ***