Operation Manual

GB-10
Inactive Standby
Use the Inactive Standby to turn off the unit after a certain time in play mode.
1. During System settings mode, press the / buttons to select Inactive
Standby and then press the SELECT button to confirm.
2. The display will show : Off > 2 hours > 4 hours > 5 hours > 6 hours
3. Press the / buttons to select and then press the SELECT button to
confirm.
Language
1. During System settings mode, press the / buttons to select Language
and then press the SELECT button to confirm.
2. Press the / buttons to change the display language of your choice.
3. Press the SELECT button to confirm.
Factory Reset
There may be times when you need to reset your unit back to the factory
settings especially when you have moved house. If you experience reception
problems you may want to reset and try again.
If you move to another part of the country and pick up the local and national
DAB+ stations in that area, your previously tuned channels may no longer be
available.
1. During System settings mode, press the / buttons to select “Factory
reset”, and press the SELECT button to confirm.
2. Press the / buttons to select Ye s, and press the SELECT button to
confirm or select No to cancel.
Software update
1. During System settings mode, press the / buttons to select Software
update and then press the SELECT button to confirm.
2. Press the / buttons to select Auto-check setting or Check now, and
then press the SELECT button to confirm.
After the system reset, all the tuned stations, DAB & FM preset
stations will be erased.
Before downloading software, ensure that the radio is plugged into
a stable mains power connection. Interrupting the mains supply
during software download can lead to functional disturbances and/
or damage to the unit!