Multi-functional Jump Starter and Power Bank Instruction Manual Facebook.
Contents Precaution ........................................................................................... 4 Safety Instructions/Warnings .................................................................... 4 General Warnings ..................................................................................... 4 Product Package................................................................................... 6 Product Diagram ............................................................................
Jumpstarting Procedure as Below ........................................................... 16 Caution When Using ............................................................................... 17 Caution After Using ................................................................................. 18 Charge Electronic Products ................................................................. 18 Specifikationer for stik til laptop ........................................................ 19 FAQ ..............
Precaution We appreciated your recent purchase of our product. Please read this manual deliberately before utilizing the appliance and hold it for future reference. Safety Instructions/Warnings Before using this unit, read and see all safety instructions and warnings carefully, basic safety precautions ought to dependably be taken after to diminish the danger of flame, leaking batteries, injury, and materials harm. General Warnings 1.
. Do not open the appliance to flame, serious warmth or combustible fluids. 6. Do not open the appliance to supplant the inside battery. No client replaceable parts are inside the jump starter. 7. Do not use this item where there are combustible vapor, gasses or dust present. 8. To reduce the risk of damaging plugs and cords, never pull the cable to remove the plug from a socket outlet. 9. Dropping, hitting or applying excessive amounts of force to the hope starter may damage the unit.
Reuse of reused materials forestalls genetic contamination and lessens the interest for crude materials. Product Package 1. AC adapter 2. Car charger 3. USB cable 4. Smart clamp 5. Jump starter 6. User manual 7. EVA zipper bag 8. Laptop cable 9.
Product Diagram EN EN LED Flashlight LED Flashlight Jumping port Jumping port Input port Input port Capacity indicator Capacity indicator USB charging ports USB charging ports Power button (Master switch) Power button (Master switch) 12V/16V/19V-3.5A output port 12V/16V/19V-3.
Press the power button, LCD will show battery level, output and battery symbol. When you utilize the appliance to charge your devices, the output voltage and current will be indicated on the LCD screen. 1. When charging jump starter, the charging symbol “IN” will flash on LCD; When completely charged, the battery level is 100%. 2. When utilizing USB charging, LCD will show current for 5 seconds and after that change to battery level.
Specification Battery Capacity: 10000mAh/37Wh Battery Type: Lithium-ion battery cell Starting voltage: 12V Output: 5V/2A max 3A; 12V/16V/19V-3.
Indicator Indicator EC5 Socket EC5 Socket Safety Instructions 1. Når smartklemmen begynder at generere output, må du ikke tilslutte den røde og den sorte klemme sammen, da dette vil medføre kortslutning og beskadige jumpstarteren. 2. If the product expands, please quit utilizing it. Nine Safety Protections 1. Short Circuit Protection When short circuit happens, the indicator red light of smart clamp will be on and alarm sound, the clamp will shut down output automatically. 2.
of car battery is too low when jump starter starts the car because of low capacity. The indicator red light will be on and the smart clamp will shut down output automatically to keep the car battery being damaged. 5. Over-Voltage Protection Normalt er bilens batterispænding 12 V, men det kan forekomme, at spændingen overstiger 12 V, når jumpstarteren starter bilen, pga. den høje kapacitet. Den røde indikator lyser, og smartklemmen slår automatisk outputtet fra for at beskytte bilens batteri mod skader. 6.
How to Charge Jump Starter Safety Instructions 1. Anvend aldrig andre ladestik, brug kun den medfølgende oplader til opladning af jumpstarteren. 2. Sluk alle enheder, der sidder til opladning, således at ladetiden nedsættes og batteriet udnyttes bedst muligt. 3. Please do not jumpstart the auto while charging the appliance. 4. Be far from any unsafe source while charging the appliance, for example, combustible exhaust, gasses or water and so on. 5. Keep the temperature between 0°C - 40°C while charging. 6.
9. Husk at tjekke hver tredie måned, om apparatet er i orden, og at oplade enheden hvert halve år. Charging Procedures Technique 1: Technique 2: Connect AC adapter Plugged Connect one end of car into a socket Outlet to 15V charger to 15V input port of input port Of the jump starter the jump starter, then connect to Start charging. the other end to Cigarette lighter port to start charging. Safety Protections 1. Over Current Protection 2. Over-Voltage Protection 3.
Hvis der forekommer overstrøm, overspænding eller kortslutning, afbryder apparatet automatisk sit energiinput/-output og aktiverer beskyttelsestilstand for at forhindre skader på dig eller din enhed. Fjern alle stik fra apparatet og opbevar det på et køligt og tørt sted. Herefter skal apparatet oplades for at genaktivere det. Cautions: 1. Do not charge device immediately after starting. 2. Do not plug in clamp into device when charging. 3. Do not charge device over 10 hours.
1. Vehicles may have electrical and electronic systems that may be damaged if subjected to high starting voltages and voltage crests. Before connection the appliance to the vehicle, read the vehicle’s owner’s manual to confirm that external-starting assistance is allowed. 2. Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and whatever other conditions that may influence its operation. 3.
10. Remember there is an auto-off component on the jump starter. What if you don’t attempt to start your car within 30 seconds, it will consequently close itself off. 11. Before starting your car, make sure the vehicle is in neutral with the parking brake applied. Jumpstarting Procedure as Below 1. Tightly interface the red clip to auto battery positive (+), black clip to negative (-), normally the green and red indicator light of smart clamp will flash alternately.
Vigtigt: Hvis smartklemmen udsender en alarm, kan det være nødvendigt at fjerne klemmen fra batteriet, tage smartklemmen af jumpstarteren og starte forfra. Caution When Using 1. Tightly interface the car clip plug, or it will influence starting vehicles, even cause car plastic liquefy down. 2. Each starting vehicle interim to 10 seconds, the constantly starting times is not more than 20 times. 3.
4. Efter starten må du ikke forbinde begge klemmer, da dette kan medføre uheld. Caution After Using 1. When you are not utilizing it, store it in a dry place, well-ventilated place out of the reach of children. 2. Children should not have access to stored appliance. 3. The appliance should be out of direct sunlight, heat and moisture. 4. Before of self-consuming, we recommend that you check the appliance every 3 months and recharge it every half year to guarantee satisfactory performance when needed. 5.
2. 12V/16V/19V 3.5A output: Before turning on the main switch, short press it and you can switch the output between 19V 16V and 12V with light indicators on. Different digital devices require different voltage. For example, laptop may need 19V or 16V. So before use please confirm your required voltage. 12V/3.5A can power 12V tools like radios, navigation equipment, camcorders, etc.
EN DA Laptop Plug specification Specifikationer for stik til laptop A: 6.0*1.4 - Sony, Fujitsu, Samsung A: 6.0*1.4 - Sony, Fujitsu, Samsung C: 5.5*2.5 - Dell, IBM, Acer, C: 5.5*2.5 - Dell, IBM, Acer, Toshiba. Toshiba. etc. etc. D: 5.5*2.1 - Acer, IBM, Toshiba, D: 5.5*2.1 - Acer, IBM, Toshiba, Lenovo, etc. Lenovo, etc. E: 5.5*1.7 --Acer, Sony E: 5.5*1.7 --Acer, Sony H: 5.0*1.0 - Samsung H: 5.0*1.0 - Samsung F: 4.8*1.7 -HP, ASUS, etc. F: 4.8*1.7 -HP, ASUS, etc. I: 7.4.0.6 -HP, Dell I: 7.
Q: How many times of jump starting can I get from the device before recharging? A: A large number of factors influence the answer, including the following: the period for every jump starter, the charge level of the original battery, time allotment between jump starts, vehicle temperature being kicked off, the size of the motor, the mechanical condition of the engine and starter and more. These variables should all be weighed on an individual premise before an accurate answer can give.
ALLE RETTIGHEDER RESERVERET, COPYRIGHT DENVER ELECTRONICS A/S Elektrisk og elektronisk udstyr samt medfølgende batterier indeholder materialer, komponenter og stoffer, der kan være skadelige for menneskers sundhed og for miljøet, hvis affaldet (kasseret elektrisk og elektronisk udstyr og batterier) ikke håndteres korrekt. Elektrisk og elektronisk udstyr og batterier er mærket med nedenstående overkrydsede skraldespand.
