22”LED TV WITH DVD Model NO.
Contents Contents Caution Safety Information 1 2 Accessories Technical Specification 3 3 Product Introduction Front View Rear View 4 4 4 Connections 5 Remote Control 6-7 Basic Operation 8 OSD Menu 1. Channel menu 2. Picture menu 3. Sound menu 4. Time menu 5. OPTION menu 6.
Caution Caution The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety Information Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety • The TV set should only be connected to a mains supply which matches that stated on the label on the mains adaptor. • To prevent overload, don't share the same mains supply socket with too many other items of equipment.
Accessories & Technical Specification Accessories INPUT 1 2 3 4 5 6 7 8 9 0 CH.list PICTURE SOUND SLEEP DISPLAY CH+ VOL+ MUTE CH- VOLEXIT MENU OK ROOT FAV TV/TXT HOLD A-B SLOW REPEAT PROGRAM ANGLE TITLE SUBTITLE User’s Manual NICAM/A2 ZOOM SIZE GOTO SUBPAGE INDEX LANGUAGE REVEAL SETUP D.
Product Introduction Product Introduction Front View Please insert a12cm disc according to the instruction marked below the DVD slot. LED Indicator Remote Control Window (keep clear) 1). (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby)LED Indicator: Press POWER to turn on and off.
Connections Connections SCART USB POWER: Connect to the mains adaptor. USB:Connect to USB device for multimedia HDMI: Connect it to the HDMI of DVD or other equipment. VGA: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC. PC-IN: Connect it to the audio output terminal of PC. SCART: Connect them to the SCART video output terminal of DVD.(used in component source) Headphone: Connect it to your headphone or other audio equipment.
Remote Control Remote Control The remote control is using Infra-Red(IR). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle. INPUT 1 2 3 4 5 6 7 8 9 0 CH.list PICTURE SOUND SLEEP POWER : Turn on/standby the TV. INPUT : Source select. 0-9, -/-- : Choose channel. : Go to program you latest program.
Remote Control Remote Control INPUT 1 2 3 4 5 6 7 8 9 0 CH.list PICTURE SOUND SLEEP DISPLAY CH+ VOL+ MUTE CH- VOLEXIT MENU OK ROOT FAV TV/TXT HOLD : Load/eject DVD disc. : Play/Pause program : Stop program : fast reverse : fast forward : previous chapter : next chapter A-B: Select and play the preferable paragraph of DVD program by pressing this key twice at the beginning and end of it. SLOW : Play DVD programs at slow speed. ZOOM: Adjust picture size in USB mode.
Basic Operation Basic Operation Power on/off 1. Connect to the power supply with a power cord and an adaptor. 2. -To turn on the TV Press POWER button on the TV or remote control. -To turn off theTV Press POWER button on the TV or remote control.
OSD Menu OSD Menu 1. CHANNEL menu Description ĥ Ĥ Auto Tuning Press OK button to start auto tuning. You could press MENU/EXIT button to exit the process of tuning, there will be a hint on the screen, and you should press button to confirm, or press button to cancel the operation. ATV Manual Tuning Press OK button to enter the ATV Manual Tuning menu. ĥ Ĥĥ Ĥ Storage to: Select a Channel for storing the programme. System: Select the color & sound system. Current CH: Select the the channel for edit.
OSD Menu OSD Menu Programme Edit Press OK button to enter the Programme Edit menu as the following picture. Delete: Select a channel and press RED button to delete. Swap: Select a channel, and press YELLOW button to highlight the channel, then you can use Ĥ and ĥ buttons to select the channel you want to be swapped, press OK button to confirm.
OSD Menu OSD Menu 2. PICTURE menu Description Picture Mode: Choose from Standard, Dynamic, User and Mild. Note: Contrast, Brightness, Color and sharpness are only available and can be adjusted in the User mode option in the Picture Mode Settings. Contrast: Controls the difference between the brightest and darkest regions of the picture. Brightness: Controls the overall brightness of the picture. Color: Control the color.
OSD Menu OSD Menu 3. SOUND menu Description Sound Mode: Allows you to select among: Standard, Music, Movie, Sports and User. Treble(Can be adjusted when the sound mode is User): Controls the relative intensity of higher pitched sounds. Bass (Can be adjusted when the sound mode is set to User): Controls the relative intensity of lower pitched sounds. Balance: To adjust the balance of the left and right sound track, or turn off the volume of the left and right sound track.
OSD Menu OSD Menu 4. TIME menu Description Clock: Use the and buttons to select the position, and use the and buttons to set the time. Off Time: Press OK button to enter the submenu, you could set the time when the TV set will be turned off automatically, you could also set the frequency. On Time: Press OK button to enter the submenu, you could set the time when the TV set will be turned on automatically, you could also set the frequency, volume and program.
OSD Menu OSD Menu 5. OPTION menu Description OSD Language: Allows you to select menu language. TTX Language: Allows you to select teletext language. OSD Duration: Allows you to select the time for the OSD display on the screen. Blue Screen: Turn on/off the blue screen function when there’s no signal. Restore Dafault: Press OK button to restore factory default.
OSD Menu OSD Menu 6.HOTEL mode Press MENU and enter 2580 for hotel menu Hotel Lock Lock Channel Set Source Channel Number Picture Lock Key Lock Max Volume Source Lock Clear Lock DataBase Export Database Import ON OFF ATV 0 OFF OFF 100 Hotel Lock: Press Left/right and set Hotel Lock On/Off. When Hotel Lock is ON, Lock Channel-Source Lock can be used as below. Clear Lock: To clear hotel lock, press Left/Right and then clear the lock setting. Lock Channel: Channel menu lock.
Multimedia Operation Multimedia Operation Basic Operation ĥ Ĥ 1). Press the INPUT button on the remote control to display the input source menu, select Media source by the / buttons, and press OK button to enter the Multimedia menu seen below. Input Source ATV AV SCART YPBPR DVD VGA HDMI USB 2). Insert USB device, you will find the name of the device display on the screen. MAINS MENU PHOTO MUSIC MOVIE TEXT USB device list MAINS MENU PHOTO MUSIC MOVIE TEXT Hints for operation 3).
Multimedia Operation Multimedia Operation 1. Photo Play the photo Press / button to select the option on the table, and press OK button to change. Repeat: Select the repeat mode from Repeat All, Repeat 1, Repeat None. Playlist: Display the playlist on the screen, and you can select the photo by / press OK button to program. Press / button to return to the options table. Info: Display the information of the photo. Rotate: Rotate the photo clockwise/counterclockwise. button, and 2.
Multimedia Operation Multimedia Operation 3. Movie Play the movie Press / button to select the option on the table, and press OK button to change. Repeat ALL: Select the repeat mode from Repeat All, Repeat 1, Repeat None. Set A-B: Select and play the preferable paragraph of the program by seting A and B at the beginning and end, and there will be a sign on the left screen, press OK button again to cancel. Playlist: Display the playlist on the screen. Info: Display the information of the movie.
TV/AV/DVD /EJECT 19
21
22
23
24
25
Simple Troubleshooting Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions.Remember to check the peripherals topinpiont the source of the failure. If the display still fails to perform as expected,connect your helpline for assistance. No power - Check all connections to the TV. - Press either the power button or the Standby button on the Remote control.
Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly. Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below.