SMART TV with DVB-T2/S2/DVB-C and H.265/HEVC Support Model: LDS-5575 Quick start guide The full user manual can be found by searching for this model number at www.denver-electronics.com.
Safety Information IMPORTANT SAFETY INSTRUCTIONS-READ CAREFULLY BEFORE USE. Take note of the following safety information which appears on the back of the TV. CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE ANY SCREWS AND COVERING, NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates the important information in the accompanied operating instructions. Always read this information carefully.
Front View LED indicator/Remote Control window (keep clear of obstructions) Button assignments (standby): Switch the TV on or to standby. (source): Press to select a source. (menu): Press to display the OSD menu; press again to exit the menu. CH+/CH-: Press to scan through channels; move down/up in the OSD menu screen. +/ - (volume up or down): Press to adjust the volume; move left/right in the OSD menu screen; the + (volume up) button can be used to skip to a next menu.
Connections LAN (RJ45) port: Connect a RJ45 plug to an external modem or network access equipment. HDMI port: Connect a DVD/Blu-ray player or other HDMI device TV1 (S2) jack: Connect a satellite signal. TV2 (T2/C) jack: Connect to an aerial socket on the wall with the RF coaxial cable. OPTICAL jack: Connect to an external digital audio device. CI (Common Interface): Cl slot. AV jacks: Connect to the audio & video output terminals of a DVD player.
Installation of TV channels This TV comes with a triple digital tuner: • used for digital terrestrial TV: DVB-T2 - H.265 HEVC; • used for digital cable TV: DVB-C; • used for digital satellite TV: DVB-S2. The TV also has an analogue tuner. When you start the TV for the first time, first time setup will appear. You can select a language and country by using the left/right arrow buttons. After making the settings, press the OK button. The auto tuning menu screen appears.
The TV has a common interface+ input. This allows you to insert a CA module from your TV/cable provider to watch pay-to-view channels and selectable channels outside of your package. Read the instructions shown on the back of the TV on how to insert a CA module. Streaming Press button on the remote control to display the home menu. Use the arrow buttons to select an item or app on the home menu then press OK. You may also press the hotkey on the remote control to access the desired app directly.
Attaching the stand The pictures below are only for reference. 1. The supplied accessories for attaching the stand to the TV Before installing the stand, please check that you have all of the parts and that there is no visible damage. If a part is missing or appears damaged, please contact customer service. TV set Stand 4x screws (M5 x 20) 2. How to install the stand? Place the TV face down on a soft and flat surface (e.g. blanket, foam, cloth, etc.) to prevent any damage to the TV.
Please notice - All products are subject to change without any notice. We take reservations for errors and omissions in the manual. ALL RIGHTS RESERVED, COP YRJGHT DENVER ELECTRON ICS A/S Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.
www.facebook.
