HD LED TV with DVB-T2/S2/DVB-C and H.265/HEVC Support Model: LED-3 268 User’s Guide NOTE: Read all of the instructions before using this TV and keep the instruction manual in a safe place for future reference.
Contents Select Input Source 8 First Time Installation 9-10 Main Menu Operation 11-13 OSD MENU 14-25 1.Picture menu 14-15 2.Sound menu 3.Time menu 16 17-18 4.Lock menu 19-21 5.Setup menu 22-25 6.
1
2
Due to the manufacturing process of components, televisions and other electronic products can have parts that may produce a smell after the product is first turned on and warms up. The smell will usually dissipate within a few days of use and does not return. This is normal and occurs with many electronic products. Please ensure there is sufficient ventilation around the TV and in the room and the odor will dissipate.
POWER/STANDBY: 4
USB 500mA 5V Common Interface Mini AV Mini YPbPr COAX HDMI3 HDMI2 VGA PC AUDIO TV1(S2) SCART PC AUDIO TV2(T2/C): HDMI: Connect DVD/Blu-ray player or other equipment. Coax: Digital output to AV receiver. USB: Connect to USB device for multimedia .
The remote control is using Infra-Red(IR). Point it towards the front of the LED TV. The remote control may not work correctly if it is operated out of range or out of angle. POWER PICTURE MUTE SOUND ASPECT SLEEP EPG FAV SUBTITLE CH.LIST TV/RADIO INPUT POWER(red button): Turn the TV on/standby. MUTE: Press to mute the sound, press again or press VOL+ to unmute. PICTURE: Select the picture mode. SOUND: Select the sound mode.
POWER PICTURE MUTE SOUND ASPECT SLEEP EPG FAV SUBTITLE CH.LIST TV/RADIO INPUT OK MENU EXIT 1 2 3 4 5 6 7 8 DISPLAY 9 0 VO L TV/TXT INDEX CH CANCEL REVEAL HOLD SIZE NICAM/A2 SUBPAGE VOL +/- : Volume +/-. CH / : Channel/Program +/-. : Play/pause program. : Stop program. : Fast reverse. : Fast forward. : Previous chapter. : Next chapter. Colour buttons : Short cuts-follow the coloured links in the text. Buttons for TELETEXT operating You could use the buttons only in TELETEXT .
8
1.Press the menu button 2.Press button,enter “SETUP” page,choose First Time Installation by pressing button. Press OK for Auto Tuning. Tune Type :Select Tune Type as DTV+ATV or DTV, you can choose Air(DVB-T), Cable(DVB-C), in “Digital Type”. Air(DVB-T) Auto Tune: Select DTV+ATV in “Tune Type”, and DVB-T in Digital Type, then press OK to start tuning.
Cable (DVB-C) Auto Tune: Tuning Setup Tune Type DTV + ATV Digital Type DVB-C Scan Type Full Network ID Auto Frequency Auto Symbol Rate Auto MENU Back ENTER Start Select DVB-C in “Digital Type”: There are 2 options for DVB-C “Scan Type”: 1.Full: Select “FULL”in “Scan Type”and choose “OK” to start Auto Search for the channels. 2.Network:Select “Network” in “Scan Type” Input the number of the Network ID of the channel and choose the frequency and press “OK” button to find specific TV channel.
OK OK Refer to P. 9 and P.10.
Press MENU,then choose ATV Manual Tuning. Start searching channel by presing button. Once a channel is found,it will automatically stored. Repeat the step by changing the channel number. DTV Manual Tuning DVB-T Manual Tuning: Enter the DTV Manual Tuning. Press / button to adjust the channel and press OK button to manual tune. DVB-C Manual Tuning: Enter the CADTV Manual Tuning. Press / button to select the item and press “Frequency”, “Symbol”, “QAM Type” and press OK button to manual tune.
OK Fav button to add or remove the channnel to/from your favorite list.
OK 14
S 15
OK OK OK 16 15
OK OK press "OK" button to confirm selection and enter the sub-menu. to confirm selection and enter the sub-menu.
confirm selection and enter the sub-menu. press "OK" button to press "OK" button to confirm selection and enter the sub-menu.
OK OK OK 19
OK OK 20
OK OK OK OK 21
OK OK OK 22
OK OK OK 23
OK OK OK OK OK OK CEC Control On Audio Receiver Off Device Auto Power Off Off TV Auto Power On Off Device List Device Menu CEC Control Press button to turn the CEC Control on or off. Audio Receiver Press button to turn the Audio Receiver on or off. Device Auto Power Off Press on or off. button to turn the Device Auto Power Off TV Auto Power Off Press on or off. button to turn the TV Audio Power Off Device List Device Menu Press OK button to open the main menu of device.
Screen Menu(Under PC mode only) Press INPUT,choose PC.
OK OK 26
OK 27
OK OK 28
OK OK OK 29
OK OK 30
Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions.Remember to check the peripherals topinpiont the source of the failure. If the display still fails to perform as expected,connect your helpline for assistance. No power - Check all connections to the TV. - Press either the power button or the Standby button on the Remote control. No picture or sound - Ensure that the TV is plugged in and the power is on.
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly. Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below.
LED-3268 39 57 32 81 2017
