4K UHD CURVED LED TV with DVB-T2/S2/DVB-C and DVB-T2/S2 4K Support Model: LED-5573K User’s Guide NOTE: Read all of the instructions before using this TV and keep the instruction manual in a safe place for future reference.
Contents Auto Installation Setup 8 OSD MENU 9-15 1.Channel Setting 9-13 2.Picture menu 3.Sound menu 13 14 4.Time menu 14 5.Setup menu 14 6.
1
2
Due to the manufacturing process of components, televisions and other electronic products can have parts that may produce a smell after the product is first turned on and warms up. The smell will usually dissipate within a few days of use and does not return. This is normal and occurs with many electronic products. Please ensure there is sufficient ventilation around the TV and in the room and the odor will dissipate.
CH+/CHVOL+/VOLPOWER/STANDBY POWER/STANDBY: 4
USB EARPHONE COAX MINI AV Common Interface MINI YPBPR USB TV1(S2) TV2(T2/C) HDMI3 HDMI1 HDMI2 VGA PC AUDIO SCART HDMI 1: Connect DVD/Blu-ray player or other equipment. Supports UHD 4K (2180P) resolution. HDMI 2: HDMI 2.0 (HDCP 2.2). Supports UHD 4K (2180P) resolution. PC AUDIO HDMI 3: HDMI 1.4a (HDCP 1.4). Supports 1080P resolution only. TV1(S2) : 4K tuner support for S2. TV2(T2/C): 4K tuner support for T2. USB: Connect to USB device for multimedia (up to 1080P).
The remote control is using Infra-Red(IR). Point it towards the front of the LED TV. The remote control may not work correctly if it is operated out of range or out of angle. POWER PICTURE MUTE SOUND ASPECT SLEEP EPG FAV SUBTITLE CH.LIST TV/RADIO INPUT POWER(red button): Turn the TV on/standby. MUTE: Press to mute the sound, press again or press VOL+ to unmute. PICTURE: Select the picture mode. SOUND: Select the sound mode.
POWER PICTURE MUTE SOUND ASPECT SLEEP EPG FAV SUBTITLE CH.LIST TV/RADIO INPUT OK MENU EXIT 1 2 3 4 5 6 7 8 DISPLAY 9 0 VOL TV/TXT INDEX CH CANCEL REVEAL HOLD SIZE NICAM/A2 SUBPAGE VOL +/- : Volume +/-. CH / : Channel/Program +/-. : Play/pause program. : Stop program. : Fast reverse. : Fast forward. : Previous chapter. : Next chapter. Colour buttons : Short cuts-follow the coloured links in the text. Buttons for TELETEXT operating You could use the buttons only in TELETEXT .
blue Use the Left/Right/Down keys to select your Language, Country and Environment.
Channel Setting ATV Manual Tuning Antenna CHANNEL Auto Tuning > ATV Manual Tuning > DTV Manual Tuning > Programme Edit > Signal Information > 1.Press the Menu button on the remote control on your LED TV to select the Channel menu. 2.Press the buttons to select the Antenna menu.Press OK to select it. 3.Press the buttons to select DVB-T or DVB-C. Auto Tuning You can manually tune ATV Manual Tuning in the CHANNEL Menu. 1.
Programme Edit Power-Off-No-Signal-Down If no valid input signal is detected,the TV set will toggle to standby mode automatically after approx.10 minutes. Auto-Power-Down 4 hours maximum after the last user interaction and/or the last channel switching,the TV set will automatically toggle from On to standby mode.Prior to this autonatic toggling,a message will be displayed allowing you to extend the delay time for another 4 hours.
Satellite edit menu Satellite Tuning Select “Dish Setup” item to enter the satellite system setting menu and the user operation interface as following: Operations in satellite edit menu are shown in the following table : Option Satellite Longitude Direct ion Value Press Yellow button to rename.
Transponder List Transponder Edit menu Operations in Transponder List Menu are shown in the following table: Operations in Transponder Edit menu are shown in the following table: Key Stroke Action KEY_UP use cursor to up KEY_DOW N use cursor to down KEY_LEFT switch operation to Satellite list KEY_RIGH T switch operation to satellite system parameters setting list KEY_ENTE R Value Option No Current edit item.
Operations in Setting item menu are shown in the following table: Option LNB Type Value Universal,MDU1,MDU2,9750MHz,10600MHz,10750MHz, 11250MHz,11300MHz,11475MHz,09750/10750MHz,10000/ 10450MHz,5150MHz,5750MHz,User Mode LNB Power off,13/18V,13V,18V 22KHz Auto,off,on DisEqC Mode Off,LNB1,LNB2,LNB3,LNB4,Burst A,Burst B Motor None,DisEqC1.2,DisEqC1.3 Toneburst None,BurstA,BurstB Dis Eqc1.0 None,LNB1,LNB2,LNB3,LNB4 Dis Eqc1.1 None,LNB1,......
Audio DST TTX Language:West,Russian,East,Arabic,Farsi Restore Factory Default Speaker Delay:SPDIF Delay Hearing Impaired:off/on Aspect Mode:Auto,4:3,16:9,Zoom1,Zoom2 Blue Screen HDMI CEC VGA Setting DLC PVR Option Home Mode
Please Hotel Mode
2. Music In the option of Media Player on MainMenu,Press [OK] to enter the Media Player menu, see the picture as follows Press ▲▼ to select Movie, Music or Photo. In the same way, on Media Player menu, move cursor to Music, press [OK] button to enter into FileSelector menu. Select the file you want to play, press [PLAY/PAUSE] to enter into full screen play. Press [LEFT] /[ RIGHT] button to move cursor, and operate according to different hint.
Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions.Remember to check the peripherals topinpiont the source of the failure. If the display still fails to perform as expected,connect your helpline for assistance. No power - Check all connections to the TV. - Press either the power button or the Standby button on the Remote control. No picture or sound - Ensure that the TV is plugged in and the power is on.
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly. Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below.
LED-5573K 161 110 55 140 2017
