Specifications

1817
To repeat a track or disc
Random play function
PROGRAMMED PLAYBACK
Reviewing programs
Press the PROG button repeatedly. The track
number programmed on each program number
will be displayed.
The CD player enables you to program up to 64 tracks in a sequence of your choice. First select CD stop
mode.
1.
Press the PROG button one time.
3.
Press PROG button again; then track 4 is
stored.
2.
Press the SKIP Forward or Backward buttons
to select the desired track to be programmed.
For example:
4.
Continue to program, repeat steps 2 and 3.
Press PLAY/PAUSE button to play the program
tracks.
5.
Press REPEAT button on remote control one time,
"one track repeat" will be active. “REPEAT” shows
on display.
One track repeat
With one more press, "all track repeat" will be
active. “REPEAT ALL” shows on display.
All track repeat
Press RANDOM button on remote control during
CD play or stop mode to start random play.
Pressing once again will cancel the function.
Note: Random play cannot operate while playing
programmed tracks.
Random playing start
Intro play function
In the stop condition, press the INTRO button to
start the intro playing. After that the first 10
seconds of each song will be played.
If the INTRO button is pressed again, the CD will
change to normal playing mode.
Intro playing
Program input mode
Choose track 4
Note: If the program function has stopped,
press the PROG button and then press the
PLAY/PAUSE button, the program play will
start.
Clear the program
In stop mode, press the PROG button one time
and then press the STOP button. The preset
programs will be cancelled.
With one further press, the repeat mode is
cancelled.
PLAYING MP3 DISC
Switch on the power and press the CD PLAY/
PAUSE button to the CD mode.
Loading a MP3 disc.
Press the FOLDER or buttons to
select desired album.
Press the MP3 MODE button once, Title
name is displayed. (If no name is on the disc,
NOTHING is displayed). Press SKIP
or to select desired title from A to Z, 0
to 9, then press PLAY/PAUSE button to start
playback.
Press the MP3 MODE button twice and
ALBUM is displayed. (If no name is on the
disc, UN_KNOWN is displayed). Press the
SKIP or button to select
desired album; then press the PLAY/PAUSE
button to start playback.
1.
2.
3.
4.
1.
2.
To repeat a track or album
Press the REPEAT button on remote control
once, MP3 plays one track repeatedly and
REPEAT is displayed.
Press this button twice, MP3 plays all tracks
repeatedly and REPEAT ALL is displayed.
Press this button three times, MP3 disc
repeats the current playing Album and
ALBUM REPEAT displayed.
To cancel repeat function, Press REPEAT
button on remote control repeatedly until
repeat function display goes off.
1.
2.
3.
4.
Random play function
Press RANDOM button on remote control during
playing or stop condition to start random play. Press
once again to cancel the function.
Random playing start
One track repeat
All track repeat
Album repeat
Intro play function
During the stop condition, pressing the INTRO
button to start the intro playing. After that the first
10 seconds of each song will be played.
If the INTRO button is pressed again, the MP3 will
change to normal playing mode.
Intro playing
Press the SKIP or buttons to
select desired track.
Press the PLAY/PAUSE button to play MP3.
Note: When MP3 is playing, press and hold
MP3 MODE button about 2 seconds, the track
no, title and artist information will be shown
repeatedly in the display if disc information is
available.
To resume normal play display, press and hold
MP3 MODE button about 2 seconds.
Album search (if disc information available)
After reading TOC
Notice: For MP3/CD Playback capability
because of None-Standardized format
definition/production of MP3/CD Playback
quality & performance are not guarantee.
DENVER is not responsible for the playability
of MP3 in any case due to recording conditions
such as PC performance, writing software,
Media ability etc.