Specifications

1413
TIMER ON/OFF SETTING
NOTE: The clock should be adjusted before the Timer On/Off setting.
Press the / to adjust the hour time up
or down. Be sure to set the hour correctly for
AM or PM.
Press the / to adjust the hour time up
or down. Be sure to set the hour for correctly for
AM or PM.
Press the SUREWAKE TIMER button on
remote control again, the TIMER OFF indicator
and hour digit begin to flash.
Press the TIMER button on remote control once more, then the Timer On and Off adjustment is finished
with the " " display remaining ON (The SUREWAKE TIMER setting will show you once on display).
4.
5.
6.
8.
2.
11.
Press the SUREWAKE TIMER button on
remote control once, the TIMER ON indicator
and hour digit begin to flash.
To cancel the Timer On setting, press SUREWAKE TIMER button on remote control until " " display
goes off.
1.
Note : To turn off the set while timer is on, press POWER button.
Note: Timer function with SUREWAKE starts the music quietly and then increases the volume to room
level or your selected volume level to make sure you are awake.
Press the / to adjust the minute time
up or down.
Press / button to adjust the minute
time up or down.
SETTING THE SLEEP
Pressing SLEEP button on remote control permits
settings from 90 minutes. When the desired time
appears, releasing your finger will set the time.
(Pressing "SLEEP" after the 10 minute showed, sleep
timer will cancel.)
Change of SLEEP Setting
90
80 70
60 50
40
9.
Press the SUREWAKE TIMER button once
setting to: TUNER or CD or iPod, selected by
pressing the / button.
10. Press the SUREWAKE TIMER button, then press
the / to select the volume level.
30 20
10
Press the SUREWAKE TIMER button once,
minute digit begin to flash.
3.
Press the SUREWAKE TIMER button once,
minute digit begin to flash.
7.
BASIC OPERATION
Electronic volume control
Electronic volume control display
Press VOL-DOWN (
-) button to adjust
sound level down, the volume level (00 - 30)
will be shown in the LCD display.
Holding down the button will result in
continuous decrease of the sound level.
Similarly, press VOL-UP (+) button to adjust
sound level up
1.
2.
3.
Muting Function
If the MUTE button is pressed, the audio output will
be muted, and the current display begins to
flashing.
Pressed the MUTE button again to resume.
PRESET EQUALIZATION
Press the EQ button on remote control repeatedly
to cycle through the preset EQ showing on the LCD
display -- PASS, CLASSIC, ROCK, POP and JAZZ.
SUPER BASS Control
Press the SUPER BASS button to get the rich bass
sound.
SUPER BASS shows on display
To switch off the SUPER BASS function, press the
button once more.
SUPER BASS shows on display