Specifications

16
15
4.
Auto tuning - Press the TUNING Forward or
Backward buttons momentarily and release.
The tuner will move Forward or Backward to the
next available station.
Manual Tuning - Press and hold the SKIP
Forward/Backward buttons until the display
approaches your desired station. Then tap the
buttons repeatedly until the display shows the
exact frequency.
Press the POWER/STANDBY button to turn the
system 'ON'.
1.
2.
Press the TUNER/BAND button to select the
radio function.
3.
Press the TUNER/BAND button repeatedly to
select MW or FM band.
1.
STORING PRESET STATIONS
The unit enables you to program 30 stations of FM
and 10 stations of MW band.
LISTENING TO THE RADIO
Example : FM mode
5.
When finished listening, press the POWER
button to shut the system OFF.
Press the SKIP Forward or Backward buttons to
tune to the desired station.
2.
Press the PROG button once, preset station
number will be flashing.
4.
Press the PROG button again. The station is
stored.
Tune to the station you wish to store.
3. Press the PRESET button repeatedly to set the
desired preset station number.
5.
To store other stations, repeat above steps.
RECALLING PRESET STATION
Press the PRESET buttons to select the
desired station.
FM
TUNER/
BAND
or
Note: For MW reception, plug the supplied frame
antenna into the MW ANT jack. Then adjust the
frame antenna until it is in position with the best
reception.
Note: When setting or recalling preset station
by direct press the number, on remote control
unit to press key number 0, 1 to preset station
01; press 0, 9 to preset station 09; press 1, 5 to
preset station 15.
Switch on the power and press the CD PLAY/
PAUSE button to the CD mode.
IN PLAY MODE
PRESS ONCE
PRESS TWICE
IN STOP MODE
PRESS ONCE
BACK TO THE
BEGINNING OF
THE CURRENT
TRACK
PREVIOUS
TRACK
PREVIOUS
TRACK
NEXT TRACK NEXT TRACK
Press and hold the SKIP button during playback:
: FAST BACKWARD
: FAST FORWARD
PLAYING COMPACT DISCS
If there is no CD inside, a "NO DISC" display
will appear.
When there is no disc
1.
2.
Loading a disc
Press the CD DOOR OPEN/CLOSE button to
open the CD door.
To load a disc, simply put the disc onto the
center spindle of the player and then press the
CD DOOR OPEN/CLOSE button again to close
the CD door. After that, reading TOC will start.
Playing the disc ( )
Press PLAY/PAUSE button to play the CD.
Playing track 1
Pause the playing ( )
Press PLAY/PAUSE button while the disc is
playing, the playing time will flash.
While paused
Stopping the disc
Press STOP ( )
Stop condition (TOC display)
Skip and Search Function
Press the SKIP Forward or Backward buttons momentarily during play mode or stop mode.
Ensure that the disc is correctly mounted on the
spindle and locked in place.
1.
2.
The display will show the total number of tracks and
the playing time of the disc.
Press PLAY/PAUSE button again to resume.
ESP will be stopped flashing after 40 seconds.
To operate by remote control
After reading TOC
Select desired track by pressing 0-9 buttons, then
press PLAY/PAUSE button to start playback.
Example: 03=Track 3, 11=Track 11.