USER MANUAL MRD-51 WWW.DENVER-ELECTRONICS.COM Please read this user manual carefully before start using the product.
CLEANING THE CABINET If the wooden cabinet becomes dusty please wipe it with a soft, non-abrasive dust cloth. Also don’t use water or spray cleaners as this can damage the cabinet and the plastic/metal parts of the unit.
TECHNICAL SPECIFICATION Turntable speed: 33/45/78 RPM (Disc size 17.5/25/30cm) CD can play CD/CD-R/CD-RW/MP3 USB can play MP3 Cassette: C60 & C90 (C120 cassette is not recommended) Output power: 2x2.5W PREPARATION FOR USE IMPORTANT: RAISING AN LOWERING THE TURNTABLE LID To open the lid. Raise it as far as it can go until the lid support bracket locks in the position. To close the lid. Pull forward the lid support bracket to release and then gently lower the lid.
LOCATION OF CONTROLS 1. DUST COVER 2. COVER MECHANISM 3. TURNTABLE 4. SPEAKERS 5. TAPE STOP/EJECT BUTTON 6. CASSETTE MECHANISM 7.
8. AUX-IN 9. 3.5mm HEADPHONE JACK 10. FUNCTION BUTTON (DAB/FM/CD/USB/PHONO/TAPE/AUX) 11. REMOTE SENSOR 12. CD DOOR 13. PLAR/PAUSE 14. STOP BUTTON 15. DN/F-R 16. UP/F-F 17. REC/DEL (RECORD BUTTON/DELETE BUTTON) 18. CD DOOR OPEN/CLOSE BUTTON 19. VOLUME KNOB/ POWER STANBY 20. POWER LED 21. DAB MENU BUTTON 22. DAB INFO BUTTON 23. DAB SCAN BUTTON 24. DAB PRESET BUTTON 25. DAB ENTER 26. LCM DISPLAY 27. TUNING BOTTON/PLAY.MODE 28. FM/DAB ANTENNA 29. AC CORD 30. ON/OFF SWITCH 31. ADAPTOR 32.
16. ENTER 17. MENU 18. EQ 19. PRESET 20. TIMER REMOTE BATTERY INSTALLATION The infrared remote control requires 2 PCS UM-4 R03, AAA (3V) Battery POWER ON/OFF 1. Press POWER to turn the system on. The power indicator lights up. 2. Press the function selector buttons (DAB/FM/CD/USB/TAPE/PHONO/AUX IN) to select the desired function. 3. Start to adjust the volume by using the volume control button. 4. When finished listening press POWER again to turn off the system. The power indicator goes off.
FM MENU Press MENU (21) (17 on remote) to access to the options. 1. Scan Setting: select this option to choose between scanning all stations or only the strong stations. 2. Audio Setting: select this option to choose between forcing mono audio or allowing stereo Sound. FM PRESET See DAB PRESET instructions. FM INFO Repeatedly press INFO (22) (18 on remote) to see the following informations: KIND OF PROGRAM/FREQUENCE/AUDIO/DATE/TIME. CD OPERATION 1.
3. Insert your cassette into the slot located on the right side of the cabinet, as shown in the illustration, with the side you wish to play facing up and the open end on the right side. 4. Cassette playback begins as soon as the tape is inserted. Adjust the VOLUME control to the desired level. 5. To advance the tape rapidly, depress the button approximately half way. The tape will move forward rapidly as long as the button is depressed. Normal playback will resume when the button is released 6.
7. Raise the cue lever to lift the tone arm of its rest. Move the tone arm to the edge of the record. The turntable starts automatically. Use the cue lever to gently lower the tone arm onto the record. Adjust the volume control to the desired level. When the tone arm reaches the end of the record it automatically returns to the tone arm rest and the record player stops. Press POWER again to turn the system off. The POWER indicator goes OFF. 8. 9. 10. Note: Do not turn or stop the turntable manually.
USB RECORDING 1. CD recording Insert USB flash drive into the USB socket. Then press CD/USB button. Place CD into the CD drawer and play the track which will be recorded. Press RECORD button twice to start recording. If all CD is played, Then all tracks will be recorded. NOTE: Recording will fail if pressing STOP button during recording 2. MP3 DISC recording Insert USB flash drive into the USB socket. Then press CD/USB button.
ALLE RECHTE VORBEHALTEN, URHEBERRECHTE DENVER ELECTRONICS A/S Electric and electronic equipment contains materials, components and substances that can be hazardous t o your health and the environment, if the waste material (discarded electric and electronic equipment) is n ot handled correctly. Electric and electronic equipment is marked with the crossed out trash can symbol, seen below.
Omega 5A, Soeften DK-8382 Hinnerup Denmark Facebook.
