USER MANUAL MRD-51 WWW.DENVER-ELECTRONICS.COM Please read this user manual carefully before start using the product.
CLEANING THE CABINET If the wooden cabinet becomes dusty please wipe it with a soft, non-abrasive dust cloth. Also don’t use water or spray cleaners as this can damage the cabinet and the plastic/metal parts of the unit. TECHNICAL SPECIFICATION Turntable speed: 33/45/78 RPM (Disc size 17.
CD can play CD/CD-R/CD-RW/MP3 USB can play MP3 Cassette: C60 & C90 (C120 cassette is not recommended) Output power: 2x2.5W PREPARATION FOR USE IMPORTANT: RAISING AN LOWERING THE TURNTABLE LID To open the lid. Raise it as far as it can go until the lid support bracket locks in the position. To close the lid. Pull forward the lid support bracket to release and then gently lower the lid. TO AVOID DAMAGING THE CABINET OR THE LID, NEVER FORCE THE LID CLOSED.
LOCATIIONS OF CONTROLS AND INDICATORS 2
LOCATION OF CONTROLS 1. DUST COVER 2. COVER MECHANISM 3. TURNTABLE 4. SPEAKERS 5. TAPE STOP/EJECT BUTTON 6. CASSETTE MECHANISM 7. USB SOCKET 8.
9. 3.5mm HEADPHONE JACK 10. FUNCTION BUTTON (DAB/FM/CD/USB/PHONO/TAPE/AUX) 11. REMOTE SENSOR 12. CD DOOR 13. PLAR/PAUSE 14. STOP BUTTON 15. DN/F-R 16. UP/F-F 17. REC/DEL (RECORD BUTTON/DELETE BUTTON) 18. CD DOOR OPEN/CLOSE BUTTON 19. VOLUME KNOB/ POWER STANBY 20. POWER LED 21. DAB MENU BUTTON 22. DAB INFO BUTTON 23. DAB SCAN BUTTON 24. DAB PRESET BUTTON 25. DAB ENTER 26. LCM DISPLAY 27. TUNING BOTTON/PLAY.MODE 28. FM/DAB ANTENNA 29. AC CORD 30. ON/OFF SWITCH 31. ADAPTOR 32. TURNTABLE PAUSE SWITCH 33.
17. MENU 18. EQ 19. PRESET 20. TIMER REMOTE BATTERY INSTALLATION The infrared remote control requires 2 PCS UM-4 R03, AAA (3V) Battery POWER ON/OFF 1. Press POWER to turn the system on. The power indicator lights up. 2. Press the function selector buttons (DAB/FM/CD/USB/TAPE/PHONO/AUX IN) to select the desired function. 3. Start to adjust the volume by using the volume control button. 4. When finished listening press POWER again to turn off the system. The power indicator goes off.
FM MENU Press MENU (21) (17 on remote) to access to the options. 1. Scan Setting: select this option to choose between scanning all stations or only the strong stations. 2. Audio Setting: select this option to choose between forcing mono audio or allowing stereo Sound. FM PRESET See DAB PRESET instructions. FM INFO Repeatedly press INFO (22) (18 on remote) to see the following informations: KIND OF PROGRAM/FREQUENCE/AUDIO/DATE/TIME. CD OPERATION 1.
3. Insert your cassette into the slot located on the right side of the cabinet, as shown in the illustration, with the side you wish to play facing up and the open end on the right side. 4. Cassette playback begins as soon as the tape is inserted. Adjust the VOLUME control to the desired level. 5. To advance the tape rapidly, depress the button approximately half way. The tape will move forward rapidly as long as the button is depressed. Normal playback will resume when the button is released 6.
Note: Do not turn or stop the turntable manually. Moving or jarring the turntable without securing the tone arm clamp could result in damage to the tone arm. AUX IN OPERATION Connect the audio system into the AUX IN jack on the rear panel, Press the PHONO/AUX IN button. Start playing from the connected device. USB OPERATION 1. Press the CD/USB button first and the FUNCTION button to enter USB mode. The ‘---‘ and USB icon will be shown. 2. Insert a USB flash device into the USB socket. 3.
2. MP3 DISC recording Insert USB flash drive into the USB socket. Then press CD/USB button. Place CD with MP3 files into the CD drawer and play the MP3 track which will be recorded. Press RECORD button twice to start recording. If all MP3 files is played, Then all tracks will be recorded. NOTE: Recording will fail if pressing STOP button during recording 3. Cassette recording Insert USB flash drive into the USB socket. Then press TAPE button. Place the cassette into the socket. Play cassette.
tional information is available at the technical department of your city.Hereby, Inter Sales A/S declares that the radio equipment type MRD-51 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: Please enter: www.denver-electronics.com and then click the search ICON on top line of website.