User Manual

Sort
LCN (Logical channel number)
Video Setting
You must set the display format to either 4:3 PanScan, 4:3 Letter Box,
4:3 Full, 16:9 Wide Screen , 16:9 PillarBox or Auto to get the maximum
display when watching TV.
Sort your channels from the following options:
[LCN] - Sort the channels in ascending order.
[Name] - Sort the channels in alphabetical order.
[Service ID] - Sort the channels according to the station.
Set LCN on or off.
To access the Menu, press then select [Picture]. The Menu SETUP
provides options to adjust the video settings. Press UP/DOWN to
select an option and press RIGHT/LEFT to adjust that setting.
Press EXIT to exit the menu.
HDMI Aspect Ratio
HDMI Resolution
TV format
To access the menu,press and select [Search Channel]. SETUP
The Menu provides options to adjust the Search Channel settings.
Select an option and press RIGHT/LEFT to adjust the settings.
Press EXIT to exit the Menu.
If the video does not appear correctly, change the setting. This
setting is to match the most common setting for HDMI.
[576i] for PAL system TV.
[480i] for NTSC system TV.
[480P]: for NTSC system TV.
[576P]: for PAL system TV.
[720P]: for NTSC or PAL system TV.
[1080I]: for NTSC or PAL system TV.
If the video does not appear correctly, you need to change the
settings. This should match the most common setting for TVs in
your country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.
Channel Search
First Time Installation
ENG-7
[1080P]: for NTSC or PAL system TV.