User Manual

ENG‐

begin playing automatically.

3. If the disc does not begin playing automatically, press the Play/Pause button.

Programming a Loaded Disc

1. While the loaded disc is playing, press the PROG button on the remote control.

2. Use the Arrow buttons to select a program slot.

3. Use the Number Keypad to enter in the chapter and title, or track.

4. Titles and chapters, or tracks will play in the order they are listed.

5. Repeat step 3 until the desired titles and chapters, or tracks are programmed.

6. Use the Arrow buttons to highlight the on-screen START button. Press the OK button t o begin playing the

programmed disc.

Connecting a USB Thumb Drive

AVI, VOB, MPEG 1, MPEG 2 and MPEG 4 video formats are supported.

1. Connect a USB thumb drive to the USB Port.

2. Press the DVD/SD/USB button to enter DVD/SD/USB mode.

3. Use the Up/Down Arrow and Play buttons to select USB mode and play content from the connected USB

thumb drive.

Connecting a Memory Card

AVI, VOB, MPEG 1, MPEG 2 and MPEG 4 video formats are supported. Note: Formats are not universally

compatible. Playback may be dependent on recording conditions.

1. Connect a SD or MMC memory card to the Memory Card Port.

2. Press the DVD/SD/USB button to enter DVD/MCR/USB mode.

3. Use the Up/Down Arrow and Play buttons to select MCR mode and play content from the connected

memory card.

Accessing the Setup Menu

To access the Setup Menu, press the Setup button on the DVD player or the remote control.

Using the 3.5mm AV Output

Require a 3.5mm to 3x RCA audio/video cable (included).

1. Connect the 3.5mm to 3x RCA audio/video cable to the AV Output on the unit’s display.

2. Connect the 3.5mm to 3x RCA audio/video cable to the RCA stereo audio inputs and composite video

input on a television.

3. Audio and video played through the portable DVD player will now be seen and heard through the

connected television.

Using the 3.5mm AV Input

Require a 3.5mm to 3 x RCA audio/video cable (included).

1. Connect the 3.5mm to 3 x RCA audio/video cable to the 3.5mm AV Input on the portable DVD player and

the composite video outputs on an audio/video source such, as a television.

2. Press the DVD/AV In button to switch to AV In mode.

3. Audio and video played from the connected source (a television) will now be output to the portable DVD

player.