GB SIZE: 148x105mm MT-774 INSTRUCTION MANUAL 7” PORTABLE DVD PLAYER WITH USB/SD/MMC INPUTS
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION Use of controls or adjustments or performance of procedures other thanthose specified herein may result in hazardous radiation exposure. This Compact Disc player is classified as CLASS 1 LASER product. CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT CAUTION! Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam.
- - excessively high output from the amplifier which can cause damage to your speakers. Please be careful in this regard. Sudden changes in the surrounding temperature can cause dew to form on the optical pickup lens inside the unit. Under this condition the unit may be unable to operate properly. If this should occur, remove the disc and allow the player to adjust to the surrounding temperature. This unit must be operated in a horizontal position.
POWER SUPPLY There are two ways to supply power: AC power supply and Lithium battery power supply. AC power operation Connect one end of the mains lead to the DC ~IN socket and the other end to an AC outlet, and set the POWER ON/POWER OFF select switch to POWER ON. Lithium battery power supply When the lithium battery be full charged, push the POWER ON/POWER OFF select switch to POWER ON, the unit will start work. Once you connect the unit to the AC outlet, the lithium battery will be charged.
1 24 25 2 3 4 5 6 7 8 9 10 19 20 21 11 12 13 22 23 14 15 GB-4 16 17 18
THE FUNCTION PARTS OF THE UNIT 1. TFT screen 2. Left button In the menu interface , press the key to move left the option, then press"OK" key to enter the current location. 3. Upward/ Previous song button: In the menu interface , press the key to move up the option, then press"OK" key to enter the current location. In the CD/VCD/DVD play interface, press the key to enter previous song 4.
REMOTE CONTROL 1 2 3 4 6 5 7 8 11 13 15 17 19 21 23 25 27 29 9 10 12 14 16 18 20 22 24 26 28 30 1. STANDBY button 2. USB/CARD button 3. DISPLAY button 4. MUTE button 5. Number button 6. REPEAT button 7. A-B button 8. GOTO button 9. STOP button 10. TITLE button 11.SETUP button 12. VOL+ button 13. Upward button 14. ZOOM button 15. LEFT button CAUTION 1.
INSTRUCTION TO KEYSTROKES OF REMOTE CONTROLLER 7. GOTO button: Press this button enter into search interface, such as: 1. Standby button: switch on/off the unit. 2. USB/CARD button: when insetr USB or CARD, press this button to play song in the USB or CARD. 3. Display button: display the information of current song. 4. Mute: mute control 5. Repeat button: Each press the REPEAT button will change the repeat mode. During MP4/VCD/ CD playback, there are three modes: Repeat single ,Repeat all and off.
13. OK button: press to enter an item in the menu or to confirm and execute a selection. 14. Zoom button: repeat this button in turn to Q1,Q2,Q3, Q4, off. 15. Vol-/+: turn down/up the volume. 16. Audio button: enter into Audio setup menu, repeat press this button to select left, right and stereo audio. 17. Subtitle button: The button's function is switch subject title in DVD disc play mode. ( One DVD disc has over 32 kind of language ). 18. Play/Pause button: Switch between Play and Pause. 19.
GENERAL OPERATION 1. Connect one end of the mains lead to the DC ~IN socket and the other end to an AC outlet, the indicator light will display red. 2. Press the CD/VCD/DVD Compartment Lid open button to open the Compartment Lid, put the DISC in. 3. Set the POWER ON/POWER OFF select switch to POWER ON, the indicator light will display green, and the unit will automatically play the DISC. 4. Press the Play/Pause button to pause the play, press twice to resume play. 5. Press Stop button to stop the play. 6.
(2)Each time you touch the " ", the fast forward speed goes from forward X2, forward X4,forward X8, for ward X16 to normal playback. (3)Each time you touch the " ", the fast backward speed goes from backward X2, backward X4, backward X8,backward X16 to normal playback. 5. Pausing disc play (1)Press the " " button to make the disc pause. (2)Press the " " button again to start playing again. 6.
10.Repeat segment Press "A-B" button on the remote controller to select expected playing segment, the default is off. Press once, the repeat begin from A Press twice, the repeat end from B Press third, close the repeat function. 11.Screen display playing status When playing and then press "DISPLAY" button on the remote controller, the screen will display the playing status: title playing time, title remainder time, chapter playing time, chapter remainder time.
(5) DVD menu English German Swedish Danish 4、Rating Setting The parental control feature allows parents to prevent their children from watching inappropriate material on a DVD. The player will deny access to the DVD contents if the DVD's rating is over PG-13. To unlock the parental control function ,you will have to enter the 4-digit security password (the default code is 8888), and press the ENTER button. 2. Video setting (1) Aspect Ratio 4:3 LB 4:3 PS 16:9 5.
VCD PLAYING OPERATION After selecting the disc, the playing mode auto form. The function whether or not work according to some the story of the disc. If the VCD disc with PBC function, it will start playing after the menu screen displaying. 1. Title/Chapter playing (The disc must have PBC function and the PBC is on) When playing, press " Menu " button , the screen will show title. Press number key "0-9" and "10+" to select expected chapter (the entering number must less than the total chapter number). 2.
will display the playing status: Track, chapter playing time, chapter remainder time. 9. Change the audio output Press the “AUDIO” button when playing, each time you press, the sound modes will change in sequence. Switch among: Left, Right, Mix, Stereo. the default is off. Press once, the repeat begin from A Press twice, the repeat end from B Press third, close the repeat function. 8.
backward X4, backward X8,backward X16 to normal playback. 3. Pausing disc play (1)Press the " " button to make the disc pause. (2)Press the " " button again to start playing again. 4. Stopping playback (1)Press the " " button once, stop playing, press the button again to stop al l play backs without last memory. (2)Press the " " button to resume from where it is stopped or start play. 5. Repeat function When playing, press “repeat” to select repeat function.
jump a chapter to playing. Press " ", playing from the next chapter; press " ", playing from the previous chapter. 3. Fast forward and fast backward (1)Press the " " button or " " button to activate fast forward or fast backward function. (2)Each time you touch the " ", the fast forward speed goes from forward X2, forward X4, forward X8, for ward X16 to normal playback. (3)Each time you touch the " ", the fast backward speed goes from backward X2, backward X4, backward X8,backward X16 to normal playback. 4.
USB/SD CARD PALY Insert the USB or SD card to the USB socket or SD/MMC socket, press “USB/CARD” button on the remote controller, the unit will read the information on the USB or SD card. The next steps as operation DVD SPECIFICATIONS Compatibility: DISC DVD/VCD/MP3 Mode: PAL/NTSC Screen size: 7 inch Power: 0.8Wx2 DC power supply: 12V, 1.5A 。 。 Work temperature: 5 C~ 35 C Lithium Battery: 7.4V/1750mAh Dimensions : 210x 164 x 41 mm (W) x (H) x (D) weight (approx) : 822.
Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly. Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below.