Specifications
Governor's
Park
Condominium
777 Washington Street
Denver, CO
1.08
A.
1.09
A.
1.
One (1) set
of
diagnostic tools, including all manuals, codes and sundries necessary to
operate the tools to test, adjust and maintain the elevator equipment provided.
The
tool
shall become the property
of
the owner.
2. Three (3) sets
of
complete certified engineering data, including parts lists and parts
numbers on all equipment as will be necessary for maintaining the equipment and for
ordering replacements. Certified engineering data shall be permanently bound.
3.
One
(1) original reproducible and three (3) complete and legible sets
of
blue
or
black
line wiring diagrams and straight line diagrams showing the complete electrical con-
nections, functions and sequence
of
operation
of
all apparatus connected with the ele-
vator, including door operator, both in the machine room and in the hoistway, together
with photographs
or
cuts
of
controller repair parts with numbers listed. Each device on
the wiring diagrams and controller panels shall be properly and permanently identified
by
name and part number.
4.
One
(1) original reproducible and three (3) complete sets
of
As-Built shop drawings,
including layouts and signal operating fixture details.
5.
Three (3) complete parts catalogs listing all replacement parts and numbers for all
equipment installed and the names
of
the equipment suppliers and reordering proce-
dures. Parts catalogs to be bound in permanent binders.
6.
Three (3) sets
of
neatly bound instructions explaining all operating features including
apparatus
in
the
car
and lobby control panels, control sequence
of
operation, adjusting
and troubleshooting procedures.
7. Three (3) sets
of
lubrication charts indicating lubrication points and type
of
lubrication
recommended for all equipment. One (1) set shall be bound and permanently main-
tained in the elevator machine room.
8.
Ten
(10) sets
of
keys to operate all key operated functions all marked and identified.
MATERIALS
&
EQUIPMENT
All materials and equipment to be furnished under this Contract/Specification shall be new,
of
the best grade and quality used for the purpose
of
commercial practice and shall be the latest
standard product as advertised in printed catalogs by reputable manufacturers. All equipment
or
apparatus
of
anyone
system must be the product
of
one manufacturer,
or
equivalent products
of
a number
of
manufacturers which are suitable for use in a unified
or
assembled system. All
parts
of
the elevator equipment shall be built to standard dimensions, tolerances and clearances
in order to ensure complete interchangeability
of
similar parts
of
similar machines and devices.
HOISTING,
HANDLING
AND
INSTALLATION
OF
EQUIPMENT
The
Elevator Contractor shall provide for all cartage, handling and receiving, hoisting and low-
ering and removal
of
equipment related to the work, from the property. The Elevator Contrac-
tor shall be responsible for all permits, fees and coordination with local authorities, including
local police and fire departments, for use
of
crane service on and around the property.
Elevator Consulting and Design,
Inc.
3