User Manual

DENVER PBA-2600
Portable Extra Power
Support most DC5V USB input smartphones, MP3, MP4 and other digital products charging.
Thank you for using DENVER products.
Please read the instructions carefully before using the product.
Follow the instructions and use it properly.
Instructions
Charging DENVER PBA-2600 (Figure / Figure )
1. Use original USB data cable and connect micro USB to micro USB port on DENVER
PBA-2600;
2. Connect USB cable to USB port on DC5V USB charger or computer. If LED signal flickers,
it means DENVER PBA-2600 is being charged;
Please pull out power supply after recharging fully.
Charging digital product with DENVER PBA-2600 (Figure )
1. Check if the charging voltage of the digital product is compatible with the DC5V
output voltage of DENVER PBA-2600.
2. Use the digital product's original cable, and connect one end to the digital product,
the other end to DENVER PBA-2600.
If battery signal (output signal) lights up, it means the charging process starts. When
the signal (output signal) goes out, it means the digital product is fully charged.