26” LCD TV WITH MPEG4 HD DVBT/C Model NO.
Contents Contents Caution Safety Information 1 2 Product Introduction Front View 3 3 Connections 4 Remote Control 5-6 Basic Operation 7 OSD Menu 1. Channel menu 2. Picture menu 3. Sound menu 4. Time menu 5. Lock menu 6.
Caution Caution The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety Information Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety • The TV set should only be connected to a mains supply which matches that stated on the label on the mains adaptor. • To prevent overload, don't share the same mains supply socket with too many other items of equipment.
Product Introduction Product Introduction Front View Led Indicator & Remote Control window (Keep clear) POWER to turn on and off. Null The effective receiving range for the signal is 5-8 metres from the front of the remote control window, and 300 to the left or right side and 200 above or below the remote control window. INPUT: MENU: CH+/-: Press to scan through channels.
Connections YPbPr Connections USB SCART POWER: Connect to the mains adaptor. USB: For software upgrade only. HDMI1/2: Connect it to the HDMI of DVD or other equipment. SCART: Connect them to the SCART video output terminal of DVD.(used in component source) PC-IN: Connect it to the audio output terminal of PC. VGA: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC. Coax: Digital coaxial output. Headphone: Connect it to your headphone or other audio equipment.
Remote Control Remote Control The remote control is using Infra-Red(IR). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle. POWER MUTE REC LIST CH/LIST SUBTITLE REPEAT REC DISPLAY INPUT POWER: Turn the TV on/standby. MUTE: Press to mute the sound, press again or press VOL+ to unmute. REC LIST: Record List. CH/LIST: Display the programs list.
Remote Control Remote Control POWER MUTE REC LIST CH/LIST SUBTITLE REPEAT REC DISPLAY INPUT OK MENU EXIT 1 2 3 4 5 6 7 8 9 0 VOL FAV PICTURE EPG SOUND SLEEP CH SCREEN TV/TXT HOLD CANCEL REVEAL SIZE SUBPAGE NICAM/A2 INDEX CH / : Scan through channels. VOL / : Adjust the volume. PICTURE: Select the picture mode. EPG: To show the Electronic Program Guide during no-menu state only in DTV mode. SOUND: Select the sound mode. SLEEP: Standby timer. SCREEN: Turn on/off the screen.
Basic Operation Basic Operation Power on/off 1. Connect to the power supply with a power code and an adaptor. 2. -To turn on the TV Press POWER button on the TV or remote control. -To turn off theTV Press POWER button on the TV or remote control.
OSD Menu OSD Menu 1. CHANNEL menu Description ĥ Ĥ Auto Tuning Press OK button to enter the hint menu, and Press / button to select the Tune Type, then press button, and use / / / button to select the Country for the TV, then press OK button to start auto tuning. ĥ ĥ Ĥ Ĥ Ĥ ĥ Ĥĥ Ĥ ATV Manual Tuning Press OK button to enter the ATV Manual Tuning menu. Current CH: Select a Channel for storing the programme.
OSD Menu OSD Menu Channel List Press OK button to enter the Programme Edit menu as the following picture. ĥ Ĥ Delete: Select a channel and press RED button, “Delete” will appear on the right of the program edit menu next to the channel you have chosen, then press RED button again, the program will be deleted. However if you decide not to continue to delete press the menu button to quit. Rename: Select an ATV channel and press the GREEN button to change the name of the ĥ channel by Ĥ0!!0!!!0 buttons.
OSD Menu OSD Menu 2. PICTURE menu Description Picture Mode: Choose from Standard, Dynamic, User and Mild. Note: Contrast, Brightness, Color and sharpness are only available and can be adjusted in the User mode option in the Picture Mode Settings. Contrast: Controls the difference between the brightest and darkest regions of the picture. Brightness: Controls the overall brightness of the picture. Color: Control the color.
OSD Menu OSD Menu 3. SOUND menu Description Sound Mode: Allows you to select among: Standard, Music, Movie, Sports and User. Treble(Can be adjusted when the sound mode is User): Controls the relative intensity of higher pitched sounds. Bass (Can be adjusted when the sound mode is set to User): Controls the relative intensity of lower pitched sounds. Balance: To adjust the balance of the left and right sound track, or turn off the volume of the left and right sound track.
OSD Menu OSD Menu 4. TIME menu Description Clock: Display the time. Time Zone: Allows you to select the time zone. Sleep Timer: Allows you to setup the sleep timer among: 10min, 20min, 30min, 60min, 90min, 120min,180min, 240min and off. Auto Standby : Turn on/off the auto standby function when where’s no signal. OSD Timer: Allows you to select the time for OSD menu displays on the screen.
OSD Menu OSD Menu 5. LOCK menu Hotel model Description Lock System: Turn on/off the Lock System function. Note: You should enter the code to operate the menu.(original code is 0000) Set Password: Set pin code. If the Pin code has been changed you must enter the present code. New : Enter the new password. Confirm: Enter the new password. ĥ Parental Guidance: Allows you to select the Parental Guidance mode. Key Lock: Lock the buttons on the TV set when you turn on the function.
OSD Menu OSD Menu 6. SETUP menu Software update(USB) Description OSD Language: Allows you to select menu language. TT Language: Allows you to select teletext language. Hearing Impaired: Turn on/off the Hearing Impaired function. PVR File System: Setup the PVR file system. Note: The options PVR File System are described on pages 29 -31. Aspect Ratio: Choose from Auto, 4:3, 16:9, Zoom1, Zoom2, Just Scan and Panorama. Blue Screen: Turn on/off the blue screen function when there’s no signal.
Multimedia Operation Multimedia Operation Basic Operation ĥ Ĥ 1). Press the INPUT button on the remote control to display the input source menu, select Media source by the / buttons, and press OK button to enter the Multimedia menu seen below. Input Source Hints and informations of USB device ATV DTV Media AV PC Component SCART HDMI1 HDMI2 HDMI3 OK MAINS MENU: PHOTO MUSIC MOVIE TEXT / ĥ 3). Press Ĥ 2).
Multimedia Operation Multimedia Operation ĥ Ĥ 1. Photo Photo viewing Press / button to select the option on the menu, and press OK button to change. Pause: Play/pause the photo view. Prev./Next: View the previous/next photo. Stop: Stop the photo view. Repeat: Select the repeat mode from Repeat All, Repeat 1, Repeat None. Music: Play/Pause the music.
Multimedia Operation Multimedia Operation ĥ Ĥ 3. Movie Play the movie Press / button to select the option on the menu, and press OK button to change. Pause: Play/pause the music. FB/FF: Fast backward/fast forward. Prev./Next: Play the previous/next file. Stop: Stop the music. Repeat: Select the repeat mode from Repeat All, Repeat 1, Repeat None. Set A-B: Select and play the preferable part of the file by setting A and B at the beginning and end. Press OK button to cancel.
Recording Operation Recording Operation PVR settings 1. PVR File System Press the MENU button, select SETUP menu, and select “PVR File System”, then press OK button to enter the setting menu. Please check whether your USB device works or not before recording. Select Disk: Select the device for the Record files. Check PVR File System: Check the system. USB Disk: Display the USB state. Format: Format the USB device for PVR operating.
Recording Operation Recording Operation Recording Record and Time shift function buttons REC: Press to start recording. PAUSE: Press to enter the timeshift mode, press again to play the recording. Stop: Press to stop recording or timeshift. LIST:To display the recorder menu. 1) Recording menu When you press REC button in DTV mode, the screen will display the recording menu as below: Note: a. display and exit the navigation menu by pressing the REC or Exit buttons. b.
EPG menu EPG menu Display the programme guide by pressing the EPG button. Display the information of the programme Display the programme name Channel list Options You can select a programme for recording using the / / / buttons. Record: Press RED button to display the Recorded Mode menu, and set the timer record. When the programme starts it will be recorded to the USB device. Display: Press GREEN button to display the information of the program.
Simple Troubleshooting Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions.Remember to check the peripherals topinpiont the source of the failure. If the display still fails to perform as expected,connect your helpline for assistance. No power - Check all connections to the TV. - Press either the power button or the Standby button on the Remote control.