User Manual

www.denver-electronics.com
This outdoor plug is IP44 water proof. Please make sure to use outdoor cable as well.
1. Get started
Download the app called “DENVER SMART HOME” on your smart phone. It is available on Appstore and Google play.
The app will ask you to register a user. Please do this by using your mobile number or email address, and then log into the
app. You will be asked to create a “family”. This is to make it easy to have several systems in the app at the same time.
Now you need to add the power plug to the app.
First, connect it to your power outlet and turn this on. Then press the on/of button for 5 seconds until the indicator flashes
quickly.
Push “Add Device” or + in top of app, and choose “socket”, and follow on screen instructions. It will guide you through the
whole setup.
Now the power plug is connected and you can make timers, countdown timers, different automatisations etc. within the
app.
Please notice, there are two ways to add the power plug to your system. EZ mode and AP mode. EZ mode are the easiest,
but if you have problems using that, the app will guide you through the AP mode instead. In this case, just follow the in-
app instructions.