User manual SEL-65220 MK2 facebook.com/denverelectronics Before operating this vehicle, read all the instructions for safe assembly and operations. User’s manual can guide you through the functions and usage of Electric scooter. Before using this Electric scooter, familiarize yourself with how to operate, so that you can keep the Electric scooter in the best condition possible.
Table of Contents 1. Product and Accessories................................................................................................3 2. Unfold/fold the Electric scooter.......................................................................................4 3. Handle bar assembly......................................................................................................5 4. Connect the charger..................................................................................................
1. Product and Accessories Menu screen Bell LED light Electric brake White reflector Throttle Shock absorption Mechanical brake Foldable Back light 6.5” wheel size Built-in rechargeable battery (25.2V~4000mAh) - It takes approximately 3 hours to fully charge the electric scooter. IMPORTANT: This Electric scooter must be charged and stored in a safe place. For safety reason and battery performance, never charge the Electric scooter in the temperature below 5°C or above 45° C.
2. Unfold/fold the Electric scooter Unfold the Electric scooter 1) 2) 3) Stand the Electric scooter on its wheels, and press the unlock clasp. Pull up the handle in a gentle way. The Electric scooter is unfolded as soon as you hear the rod click into place. Fold the Electric scooter 1) 2) 3) Hold the clasp and pull it outward Press the front tube of Electric scooter downward (Attention: the limit position must be put right.) The rod clicks audibly into place.
4) Dual action safety knob Fold-Unfold Position Press the red button to fold or unfold the Electric scooter. Rotate the safety knob to the “FOLDING” position on the left or right, then press the red button to fold your Electric scooter. Rotate the safety knob to the “RIDING” position, you can start your driving. WARNING The knob must be set to the “RIDING” position when riding for safety issue to prevent unintended folding the Electric scooter. 3.
4. Connect the charger Plug the supplied adapter into the charging port.
5. Intended Use The Electric scooter is neither a means of transport nor sports equipment, but a device for personal entertainment. The Electric scooter for domestic use only and only by a person aged at least 14 with a maximum weight of 100 kg. The other parameters for the permissible operation of the Electric scooter are defined in the section (“10. List of parameters”) .
A normally working Electric scooter operates safely and quietly. If you hear noises or notice bumpy operation, please check wheels, bearings, and brakes. Contact your customer service for repair and maintenance, if necessary.
7. Maintenance To ensure you get the best possible performance and experience from your electric scooter, it is important to do regular maintenance for important parts of the product. ● Battery maintenance ● Bearings, Screws, Brakes and Wheels ● Storage and Cleaning Your electric scooter will require some maintenance so please read and familiarize yourself with this guide.
Please check the screws regularly and tighten if they seem loose. Brakes: Check the brake for wear at regular intervals to avoid unsafe riding. Do not apply excessive force to avoid damage to the brake. Wheels: Check the wheels for wear at regular intervals to avoid unsafe riding. Electric scooters come with different wheels but can in general be separated into tires with inflatable inner tubes and solid wheels.
8. Operational control For better operation, please read the instructions carefully. Speed up button Power button Speed down button Accelerator button Electric brake button 8.1 Button There are three buttons in the display, 8.2 Power button, ▲ Speed up button and ▼ speed down button. Control and display Speed Battery Gear KM Time Single Mileage Power On: Long press the power button until the display lights up.
Important: Press ▲and ▼ buttons at the same time, then press the power button and select P3 mode, when parameter value is 0, it will start with zero. When parameter value is 1, it will start with non-zero. (Zero start: When starting, the Electric scooter in a stationary case, press the accelerator to start driving.
9.1 Front and back LED lamps This Electric scooter is equipped with the front and back LED lamps. The front lamp lights white and the back lamp lights red. 1. Walking mode: 6KM/H, when 1 mode, the front and back light will be flashed. 2. 2/3 mode: when 2/3 mode and when brake, front and back light will be on, and can not flash. User can also press the “▲”key by 5S to turn on/off the light.
10. List of parameters Parameter Size Weight Range Folding size (m) 1.08*0.42*0.28 Developed size (m) 0.97*0.42*1.08 Carton size (m) 1.13*0.22*0.33 Max Vehicle Payload (kg) 100 Net Weight (kg) 10.6 Ride Condition Age (Year) 14+ Electric scooter Max. speed (horizontal riding) (km/h) 20 Max traveling distance (km) 12 Terrain Battery Type: Li-ion battery Motor Level and dry surface Nominal voltage (V) 25.2 Input voltage (V) 29.
11. Electric scooter safe parking Once you have stopped the Electric scooter, get off it and press the side stand down with your right foot to support the Electric scooter. The side stand is located on the left-hand side of the Electric scooter below the foot board. Before you ride again, push the side stand back up so that it is parallel to the foot board. 12.
Familiarize yourself with the vehicle before you use it so that you can keep the Electric scooter in sound condition. Observe all safety instructions when riding the Electric scooter. The Electric scooter is designed only for personal entertainment. Avoid operating it on public roads/in road traffic. Children, elderly people, and pregnant women are not allowed to ride the vehicle. People with limited sense of balance are not allowed to ride the Electric scooter.
CAUTION Do not remove the protective cap from the DC input! Remove the cap only when charging the Electric scooter! After charging, disconnect the DC plug and close the DC input again with the cap! WARNING Make sure that neither water nor other liquids penetrate into the inner components of the Electric scooter; otherwise, the electronics/batteries of the device could be permanently damaged. There is a risk of injury.
Please notice - All products are subject to change without any notice. We take reservations for errors and omissions in the manual. ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.
Regarding Battery charging SEL-65220 MK2 Important – Please read! Dear customer. We hope you get a lot of joy out of your new Electric scooter. The battery built in the Electric scooter is not fully charged from production line. And when left unused the battery can slowly discharge by itself. This can lead to slow charge if the battery is fully discharged, but this is done to avoid damage to the battery.
WARNINGS Please read the manual completely and the instructions below before using the product. Product names: SEL-65220 MK2 Product type: Electric scooter Year of manufacturing: 2021 Note: ONLY use the supplied charger labelled XHK-922-29415 with the following output voltage to charge this Electric scooter:29.4V – 1.5A. Using another charger may damage the product or create other potential risks. Never charge the product without supervision.
DENVER ELECTRONICS A/S EC Declaration of Conformity (Machinery Directive) The undersigned Company Name: Address: DENVER ELECTRONICS A/S Omega 5A, Soeften, DK-8382 Hinnerup, Denmark certify that the design and manufacturing of this product Product Brand Name: DENVER Product Model No.