Specifications

D-2
www.waterblast.com
HOSES & LANCES
40,000 PSI
HOSES &
LANCES
HOSES
General purpose hoses are used to distribute high pressure water
throughout the system.
• Safety whips are six foot hoses that are connected between
a waterblast control gun and the rest of the hoses. These are
intended for periodic replacement to ensure that the hose near
the gun operator’s body is always in good condition.
• Hydro-Throttle hoses are connected from the fluid end to the
hydraulic throttle control.
*See Page D-3—D-4 for end fitting dimensions and cover descriptions. See Pages I-4 to I-6 for a description of each connection type.
PART NO.
END FITTING
CONNECTION*
LENGTH
INSIDE
DIAMETER
MAX. OPERATING
PRESSURE
MIN. BEND
RADIUS
ft m in mm psi bar in mm
27731-02539391
9/16" Type M Female
25 7.6 .20 5 40,600 2,800 8.7 220
27731-05039391
9/16" Type M Female
50 15.2 .20 5 40,600 2,800 8.7 220
29172-02539391
9/16" Type M Female
25 7.6 .20 5 40,000 2,750 9.8 249
29172-05039391
9/16" Type M Female
50 15.2 .20 5 40,000 2,750 9.8 249
70346-02539391
9/16" Type M Female
25 7.6 .23 6 40,600 2,800 9.8 250
70346-05039391
9/16" Type M Female
50 15.2 .23 6 40,600 2,800 9.8 250
59469-02541411
7/8" Type M Female
25 7.6 .32 8 40,000 2,750 11.8 300
59469-05041411
7/8" Type M Female
50 15.2 .32 8 40,000 2,750 11.8 300
59469-02533331
9/16" HP Male
25 7.6 .32 8 40,000 2,750 11.8 300
59469-05033331
9/16" HP Male
50 15.2 .32 8 40,000 2,750 11.8 300
27524- 02541411
7/8" Type M Female
25 7.6 .32 8 36,250 2,500 10.3 260
27524- 05041411
7/8" Type M Female
50 15.2 .32 8 36,250 2,500 10.3 260
28612-02541411
7/8" Type M Female
25 7.6 .32 8 40,580 2,799 9.8 250
28612-05041411
7/8" Type M Female
50 15.2 .32 8 40,580 2,799 9.8 250
28612-02533331
9/16" HP Male
25 7.6 .32 8 40,580 2,799 9.8 250
28612-05033331
9/16" HP Male
50 15.2 .32 8 40,580 2,799 9.8 250
27731-00639392 9/16" Type M Female 6 1.8 .20 5 40,600 2,800 8.7 220
59469-00641412 7/8" Type M Female 6 1.8 .32 8 40,000 2,750 11.8 300
27524- 00641412 7/8" Type M Female 6 1.8 .32 8 36,250 2,500 10.3 260
HOSE COVER OPTIONS
Abrasion Cover Guard (Code 1)
Constructed of a clear PVC or heavy-duty vinyl and reinforced with
a rigid helix coil. The Abrasion Cover Guard helps protect the hose
from excessive wear due to scuffing or rough surfaces, and also
provides additional protection from external objects.
Burst Shield Guard (Code 2)
Constructed of steel wire reinforced heavy-duty synthetic rubber.
The Burst Shield Guard helps protect the user and/or surrounding
areas from hose failures.