Specifications

G-4
NOZZLES
40,000 PSI
NOZZLES
www.waterblast.com
Nozzle Sizes (A)
Nozzles shown to actual size
*Left hand or right hand threads must be specified when
ordering.
UHPE EVAPORATOR
TUBE CLEANING NOZZLES
Designed for use with Flex or Rigid Lances
• High pressure female left-hand or right-hand threads
• Hardened stainless steel
• Custom drilled patterns available upon request
UHPEX - ABBCC
Nozzle Type
40,000 psi rated Jetstream
“Ultra-High Pressure Evaporator”
Threads
L = Left Hand Threads
R = Right Hand Threads
Nozzle Size (A)
1 = 1/4" threaded nozzle body
2 = 3/8" threaded nozzle body
3 = 9/16" threaded nozzle body
Nozzle Pattern (BB)
Select the two digit number corresponding to the
desired pattern. See Patterns chart on the next page.
When sizing a nozzle, it is important to note that each
pattern has a corresponding minimum ow rating
determined by the number of orices in the pattern.
Example: 06 denotes a nozzle with 1 jet front, 3 jets
drilled at the forward location, and 6 jets drilled at the
back location. This particular pattern is available only
for nozzles with a ow rating number of 4 or greater.
Nozzle Flow Rating (CC)
To select the correct ow number:
1) Determine the desired nozzle tip pressure.
2) Consult available ow charts for hoses, exible
lances, and rigid lances which will be used for the
tube cleaning operation to determine the amount of
ow through all components which will result in the
desired tip pressure.
3) Find the column in the ow rating chart (next page)
which corresponds to the desired tip pressure, and
select the ow number corresponding to the row
containing the desired ow rate within that column.
UHPE
X
A
BB
CC
1=1/4" THREADED NOZZLE BODY
Connection Type* 1/4" HP Lance
Outside diameter .375
Overall length 1.25
2=3/8" THREADED NOZZLE BODY
Connection Type* 3/8" HP Lance
Outside diameter .50
Overall length 1.59
9/16" THREADED NOZZLE BODY
Connection Type* 9/16" HP Lance
Outside diameter .75
Overall length 2.13